Data Sheet

Document Number: 002-30628 Rev. ** Page 30 of 46
PRELIMINARY
CYBT-213066-02
CYBT-213067-02
Table 21. BR/EDR - Transmitter RF Specifications
Parameter Min Typ Max Unit
Transmitter Section
Frequency range 2402 – 2480 MHz
Class 2: BR TX power – 5.0 –
dBm
Class 2: EDR 2M and 3M TX power – 0 –
20 dB bandwidth – 930 1000 kHz
Adjacent Channel Power
|M – N| = 2 – – –20
dBm
|M – N| ≥ 3
[9]
– – –40
Out-of-Band Spurious Emission
30 MHz to 1 GHz – – –36.0
dBm
1 GHz to 12.75 GHz – – –30.0
1.8 GHz to 1.9 GHz – – –47.0
5.15 GHz to 5.3 GHz – – –47.0
LO Performance
Initial carrier frequency tolerance –75 – +75 kHz
Frequency Drift
DH1 packet –25 – +25
kHzDH3 packet –40 – +40
DH5 packet –40 – +40
Drift rate –20 – 20 kHz/50 µs
Frequency Deviation
Average deviation in payload (sequence used is 00001111) 140 – 175
kHz
Maximum deviation in payload (sequence used is 10101010) 115 – –
Channel spacing – 1 – MHz
Table 22. BLE RF Specifications
Parameter Conditions Minimum Typical Maximum Unit
Frequency range N/A 2402 – 2480 MHz
RX sensitivity
[10]
GFSK, BDR GFSK 0.1% BER 0.1% BER,
1 Mbps
––95–
dBm
TX power N/A – 4.5 –
Mod Char: Delta F1 average N/A 225 255 275 kHz
Mod Char: Delta F2 max
[11]
N/A 99.9 – – %
Mod Char: Ratio N/A 0.8 – – %
Notes
9. Meets SIG Specification.
10. Dirty TX is Off.
11. At least 99.9% of all delta F2 max frequency values recorded over 10 packets must be greater than 185 kHz.