User guide

Cedar 880AG Dual-Radio AP/Bridge
config ip route
Syntax:
config ip route {add | del} {
net <net address>
netmask <netmask address>
[gw <ip address>]
if < if name>
}
Description:
add: Add a route entry in the routing table.
del: Delete a route entry in the routing table.
net: The network address of the specified route will apply.
netmask: The network mask address of the specified route will apply.
gw: The gateway IP address of the specified route will apply.
if: The interface of the specified route will apply.
Example:
Cedar# config ip route add net 10.60.0.0 netmask 255.255.0.0 if lan
Cedar# config ip route add net 0.0.0.0 netmask 0.0.0.0 gw
67.100.23.68 if lan
Cedar# config ip route del net 10.60.0.0 netmask 255.255.0.0
11.4 Security Commands
11.4.1 show auth
Syntax:
show auth profile { all | <profile name> }
Description:
all: Display all authentication profiles.
<profile name>: Display detailed authentication profile.
Example:
Cedar# show auth profile all
Cedar# show auth profile EAP
86