Datasheet

CY8C20xx6A/H CapSense Design Guide Doc. No. 001-65973 Rev. *A 51
7.4.2.3 Linear Slider Module Board
The CY3280-SLM Linear Slider Module consists of five CapSense buttons, one linear slider (with ten sensors), and
five LEDs. This module connects to any CY3280 Universal CapSense Controller Board.
7.4.2.4 Radial Slider Module Board
The CY3280-SRM Radial Slider Module consists of four CapSense buttons, one radial slider (with ten sensors), and
four LEDs. This module connects to any CY3280 Universal CapSense Controller Board
7.4.2.5 Universal CapSense Prototyping Module
The CY3280-BBM Universal CapSense Prototyping Module provides access to every signal routed to the 44-pin
connector on the attached controller boards. The Prototyping Module board is used in conjunction with a Universal
CapSense Controller board to implement additional functionality that is not part of the other single-purpose Universal
CapSense Module boards
7.4.3 In-Circuit Emulation (ICE) Kits
The ICE pod provides the interconnection between the CY3215-DK In-Circuit Emulator and the target PSoC device in
a prototype system or PCB via package-specific pod feet, using a flex cable. The following Pods are available.
 CY3250-20246QFN In-Circuit Emulation (ICE) Pod Kit for Debugging CY8C20236/46A CapSense PSoC Devices
 CY3250-20346QFN In-Circuit Emulation (ICE) Pod Kit for Debugging CY8C20336/346A CapSense PSoC
Devices
 CY3250-20666QFN In-Circuit Emulation (ICE) Pod Kit for Debugging CY8C20636/646/666A CapSense PSoC
Devices
 CY3250-20566 In-Circuit Emulation (ICE) Pod Kit for Debugging CY8C20536/546/566A CapSense PSoC
Devices
7.5 PSoC Programmer
PSoC Programmer is a flexible, integrated programming application for programming PSoC devices. It can be used
with PSoC Designer and PSoC Creator to program any design onto a PSoC device.
PSoC Programmer provides the user a hardware layer with APIs to design specific applications utilizing the
programmers and bridge devices. The PSoC Programmer hardware layer is fully detailed in the COM guide
documentation as well as example code across the following languages: C#, C, Perl, and Python.
7.6 Multi-Chart
Multi-Chart is a simple PC tool for real-time CapSense data viewing and logging. The application allows you to view
data from up to 48 sensors, save and print charts, and save data for later analysis in a spreadsheet.
7.7 PSoC Designer
Cypress offers an exclusive Integrated Design Environment, PSoC Designer. With PSoC Designer you can configure
analog and digital blocks, develop firmware, and tune your design. Applications are developed in a drag-and-drop
design environment using a library of precharacterized analog and digital functions, including CapSense.
PSoC Designer comes with a built-in C compiler and an embedded programmer. A pro compiler is available for
complex designs.