SemiConductor Proximity Detection Specification Sheet

More Product Available Online: www.digikey.com
Toll-Free: 1-800-344-4539 • Phone [phone] • Fax: [phone]
(T091)
685
C
PSoC
®
Express II Evaluation Kit
CY3210-PSOCEXPEVAL1:
The PSoC Express Evaluation Kit is an all-in-one evaluation kit for experiencing  rst-hand the speed and
depth of design offerings with PSoC Express, the code-free embedded development environment.
Kit Includes: • Two PSoC Evaluation boards • MiniProg USB Programmer • Cables • Software
428-1906-ND Evaluation Kit for PSoC Express ........................................................$97.00
428-2025-ND Evaluation Kit for PSoC Express II .................................................... $122.00
PSoC
®
SD Card Module Evaluation Kit
CY3210-SDCARD:
The SD Card Module Evaluation Kit assesses the PSoC SD Card user module’s ability to quickly and easily
write to, read from and seamlessly integrate an SD card module into an embedded design. SD  ash memory
technologies are quickly becoming the preferred solution for portable, consumer and industrial electronic
devices around the world for storing a large amount of information in a small, durable, portable form factor.
Note: The SD Card user module and the example projects for this evaluation kit require the use of a C
compiler.
Kit Includes: • CY3210-PSoCEVAL • SD Card Adapter Board • SD Memory Card • USB to SD Card
Reader • MiniProg1 • USB Cable • Power Supply • Software
428-1907-ND Evaluation Kit for PSoC SD Card ...................................................... $260.00
The CY3202-C iMAGEcraft C-Compiler is fully integrated into the PSoC
®
Designer IDE. PSoC Designer
supports C source level debugging. In order to activate the compiler, you must enable and upgrade.
Features: • ANSI C-Compiler • Supports In-line Assembly and can Interface with Assembly Modules
• Stack-Based • 7 Basic Data Types • Assemble and Linker • Math and String Libraries • C-Interrupt
Service Routines • Librarian
428-1413-ND iMAGEcraft C-Compiler ................................................................ $168.00
CY3202-C iMAGEcraft C-Compiler
PSoC
®
Express Development Kit
CY3210-ExpressDK:
The PSoC Express development kit provides a feature-rich hardware platform for developing and testing
designs created with PSoC Express. This kit contains a complete PSoC Express development environment
including a large, full featured development board, fan modules, proto modules, 28-DIP samples, and a
MiniProg Programmer.
Kit Includes: • Development Board • Four Fan Modules • Two Proto Modules • MiniProg Insystem
Programmer • Mini Eval PCB Evaluation Board • Power Supply • PSoC Express CD-ROM • Jumper Wire Kit
• Cables • PSoC DIP Samples
428-1636-ND PSoC Express Development Kit ........................................................ $772.00
428-1637-ND Fan Module Kit ........................................................................... $200.00
428-1638-ND Proto Module Kit ......................................................................... $100.00
PSoC
®
with USB Evaluation Kit
Special features of the board include both USB and capacitive touch sense development and debugging
support. The eval uation board also includes an LCD module, Potentiometer, LEDs, an enunciator, and plenty
of bread boarding space to meet all of your evaluation needs.
The PSoCEvalUSB board features an on-chip debugger and can be connected directly to an ICE-Cube
(available in the CY3215-DK) for full-featured, in-circuit emulation and debugging.
Kit Includes: • PSoCEvalUSB Board • LCD Module • MiniProg1 programmer • USB mini cable
• Documentation and Soft ware
428-1650-ND Evaluation Kit for CY8C24794-24LFXI ................................................. $98.99
PSoC
®
ISSP (In-System Serial
Programming) Programmer
The ISSP Programmer programs PSoC ICs with .hex  les created with Cypress SemiConductor PSoC
Designer™ software. The programmer programs a PSoC chip mounted on your PCB, one at a time. It
connects to your PCB with a 5-wire cable and to your PC with a USB cable. Programming operation can be
automated by incorporating the programmer into a PC-based test system. The tester software communicates
with the programmer-control software through a command-line interface. The ISSP programmer can also be
operated manually using the supplied Windows
®
GUI software.
Functions: • Program • Verify • Read • Flexible Connections to Target PSoC Devices: Devices can be
inserted directly into ISSP, using an on-board 48-ZIF socket, connected via a test  xture or programmed
in-system on a product circuit board.
System Requirements: • Windows®, NT, ME, 2000 or XP • CD-ROM • USB Port • 128 MB RAM
Kit Includes: • ISSP Programmer • ISSP Software CD-ROM • 6-Foot USB Cable • 2-Foot Programming
Cable • 9V Power Supply • In-System Serial Programming (ISSP) CY3207ISSP User Guide
428-1495-ND PSoC USB In-System Programmer ................................................... $354.00
The CY3236A-PIRMOTION EVK allows you to evaluate Cypress’ PSoC
®
device’s ability to control a
Pyro electric Infrared (PIR) sensor to implement motion sensing applications such as automatic lighting
controls, automatic door openers, security systems, kiosk wake-up and activating wireless cameras. The
CY3236A-PIRMOTION EVK includes all of the software, hardware, example projects and documentation
you need to implement all of these PIR sensing control functions in one  exible and powerful PSoC device,
the CY8C27443.
Kit Includes: • PIR Motion Sensor Board • Power Supply • Software • Design Files
428-2022-ND PIR Motion Evaluation Kit .............................................................. $129.00
PIR Motion Detection Evaluation Kit
CapSense™ Proximity Detection
Demonstration Kit
CY3235-PROXDET:
The CapSense Proximity Detection Demonstration Kit allows quick and easy demonstration of a PSoC
®
CapSense-enabled device (CY8C21434) to accurately sense the proximity of a hand or  nger along the
length of a wire antenna. The kit also includes the I
2
C to USB Bridge, which allows hardware and software
debugging of PSoC applications by seamlessly connecting your PC’s USB port to your application’s I
2
C
interface.
Kit Includes: • Proximity Detection Demo Board with Antenna • I
2
C to USB Debugging/Communication
Bridge • USB Cable • Software • Quick Start Guide
428-1909-ND Evaluation Kit for PSoC Proximity Detection .......................................... $73.34
PSoC
®
I
2
C to USB Bridge Kit
CY3240-I2USB:
The I
2
C to USB Bridge is a quick and easy link from any design or application’s I
2
C bus to a PC via USB
for design testing, debugging and communication. The bridge is based on 1 of Cypress’ CY8C24894, which
contains 6 analog blocks supporting ADCs, DACs and  lters, 4 digital blocks supporting PWMs, timers and
counters, and a Full-Speed USB 2.0 peripheral.
Kit Includes:
• I
2
C USB Bridge • I
2
C Slave Demonstration Board • USB Mini B Cable • Software CD
428-1910-ND Evaluation Kit for PSoC I
2
C to USB ................................................... $78.01
PSoC
®
I
2
C Port Expander Evaluation Kits
The I
2
C Port Expander Evaluation Kit allows you to easily assess the following value propositions of
Cypress’ I
2
C port expander ICs from other vendors and  exibly integrates I/O expansion, PWM functions
and user EEPROM. The kit also includes the I
2
C to USB Bridge, which allows hardware and software
debugging of PSoC applications by seamlessly connecting your PC’s USB port to your application’s I
2
C
interface.
CY3242-IOX Kit Includes:
• Port Expander Demo Board using containing CY8C9520/40/60 Port Expanders • I
2
C to USB Bridge
• USB Cable • Documentation
CY3242-IOXLITE Kit Includes:
• I
2
C Port Expander Demo Board using CY8C9520 Port Expander • USB Cable • Documentation
428-1911-ND CY3242-IOX Evaluation Kit ...........................................................$645.00
428-2023-ND CY3242-IOXLITE Evaluation Kit ......................................................$129.00
PSoC
®
CapSense™ Kits
CY3220-FPD:
This PSoC Demonstration Kit features a discrete button demonstration board for the Cypress CapSense
solution. The board features eight CapSense buttons that control an LCD Module in a car radio con guration.
The board is built using the CY8C21534-24PVXI PSoC, the only component necessary for sensing. The
PSoC senses the presence of a  nger or other capacitive element through 3mm ABS plastic.
Kit Includes: • Demonstration Board • User Guide • Documentation and Software CD • Power Supply
CY3212-CAPSENSE:
This PSoC Training Kit includes software, hardware and example projects to help designers learn how to
implement PSoC CapSense in their own design. A training board is included that is hard wired for buttons
and sliders as well as LCD control and 12C communication.
Kit Includes: • Training board • PSoC Designer and Example Project CD • CSR User Module • Mini
Programmer unit • LCD Module • USB Cable
428-1652-ND PSoC CapSense Demo Kit (CY3220-FPD) ...........................................$102.00
428-1705-ND PSoC CapSense Training Kit (CY3212-CAPSENSE) ................................$117.00
Universal CapSense™ Controller Kit
CY3280-BK1:
Designed for easy development and debugging of any CapSense design. It includes pre-de ned control
circuitry and plug-in hardware, along with controller boards for both the CY8C20x34 and CY8C21x34 PSoC
devices. It also offers a breadboard module and a module for implementing up to  ve buttons and a slider
with sample overlays to encompass a wide variety of designs.
Kit Includes: • Universal Capsense Controller Boards • CapSense Linear Slider Module • CapSense
Protyping Module • CY3240-I2USB Board • CY3210 MiniProg1 Programmer • Software
428-2033-ND Universal CapSense Controller Kit ................................................... $177.00
CapSense™ Express Evaluation Kits
The CapSense Express evaluation kits enable designers to replace mechanical buttons by implementing
touch sensing designs in minutes with the newest CapSense Touch Sensing Family, CapSense Express.
With Cypress’s PSoC Express™ visual embedded system design tool and CapSense Express con guration
tool, designers con gure, monitor, and tune up to 10 I/O’s for buttons, LEDs and other general purpose I/O’s
over I
2
C in a real time using a graphical user interface.
CY3218-CAPEXP1 Kit Includes: • CapSense Evaluation Board with CY8C20110-LDX2I • CY3240-I2USB
Bridge Board • USB Cable • Battery
CY3218-CAPEXP2 Kit Includes: • CapSense Slider Evaluation Board with CY8C201A0-LDX2I • CY3240-
I2USB Bridge Board • USB Cable • Battery
CY3218-CAPEXP3 Kit Includes: • CapSense Evaluation Board with CY8C20142-SX2I • CY3240-I2USB
Bridge Board • USB Cable • Battery
428-2043-ND CapSense Evaluation Board Kit (CY3218-CAPEXP1) ................................ $52.50
428-2044-ND CapSense Slider Evaluation Board Kit (CY3218-CAPEXP2) ......................... $52.50
428-2045-ND CapSense Evaluation Board Kit (CY3218-CAPEXP3) ................................ $52.50