Specifications

12 CY8CKIT-042 PSoC 4 Pioneer Kit Guide, Doc. # 001-86371 Rev. *D

Software Installation

3. Select the installation type and click Next.

Figure 2-2. Installation Type Options

After the installation is complete, the kit contents are available at the following location:

<Install_Directory>:\CY8CKIT-042 PSoC 4 Pioneer Kit\<version>

Note For Windows 7 users, the installed files and the folder are read-only. To change the property,

right-click the folder and select Properties > Attributes; disable the Read-only radio button. Click

Apply and OK to close the window.

2.2 Install Hardware

There is no additional hardware installation required for this kit.

2.3 Install Software

When installing the PSoC 4 Pioneer Kit, the installer checks if the required software is installed in the

system. If the required applications are not installed, then the installer prompts you to download and

install them.

The following software is required:

■ PSoC Creator 3.0 or later: Download the latest software from www.cypress.com/go/Creator.

■ PSoC Programmer 3.19.1 or later: Download the latest software from

www.cypress.com/go/Programmer.

■ Code examples: After the kit installation is complete, the code examples are available in the kit

firmware folder. Download the CD ISO image or the setup files to install the kit from