Specifications

44 CY8CKIT-042 PSoC 4 Pioneer Kit Guide, Doc. # 001-86371 Rev. *D
Code Examples
3. Build the code example by clicking Build > Build <Project name> to generate the hex file.
Figure 5-2. Build Project from PSoC Creator
4. To program, connect the board to a computer using the USB cable connected to port J10, as
described in section 3.1 Pioneer Kit USB Connection. The board is detected as KitProg.
5. Click Debug > Program from PSoC Creator.
Figure 5-3. Program Device from PSoC Creator
6. If the device is not yet acquired, PSoC Creator will open the programming window. Select
KitProg/ and click the Port Acquire button.
Figure 5-4. Acquire Device from PSoC Creator