Specifications

54 CY8CKIT-042 PSoC 4 Pioneer Kit Guide, Doc. # 001-86371 Rev. *D
Code Examples
5.4.1.2 Hardware Connections
No specific hardware connections are required for this project because all connections are hard-
wired on the board. Open CapSense.cydwr in the Workspace Explorer and select the suitable pins.
Note: The I2C communication lines are not used when tuning is disabled.
Figure 5-18. Pin Selection for CapSense Project
Table 5-4. Pin Connection
Pin Name Port Name
CapSense linear slider
P1_1 Segment1
P1_2 Segment2
P1_3 Segment3
P1_4 Segment4
P1_5 Segment5
LEDs P1_6 (Red) and P0_2 (Green)
I2C communication lines P3_0 (SCL) and P3_1 (SDA)