Specifications

60 CY8CKIT-042 PSoC 4 Pioneer Kit Guide, Doc. # 001-86371 Rev. *D
Code Examples
2. Select a sensor in the Tuning tab. A red outline is seen on the selected sensor. Different
CapSense parameters are shown on the bottom-right. You cannot edit the settings because auto-
tuning is used in this project; auto-tuning automatically sets all the parameters. Touch the
selected sensor and observe the response in the tuner window.
Figure 5-26. Sensor Tuning
3. In the Graphing tab, the CapSense results: Raw counts, Baseline, Signal (difference count) and
On/Off status for each sensor are represented as a graph.
4. Select the sensor parameters to observe, as shown in the following figure. The graph of the
selected parameters is shown.