Specifications

CY8CKIT-042 PSoC 4 Pioneer Kit Guide, Doc. # 001-86371 Rev. *D 71
Advanced Topics
Figure 6-12. Select Communication Port
4. In HyperTerminal, select 'Bits per second', 'Data bits', 'Parity', 'Stop bits', and 'Flow control' under
Port Settings and click OK.
Make sure that the settings are identical to the UART settings configured for PSoC 4.
In PuTTY select 'Speed (baud)', 'Data bits', 'Stop bits', 'Parity' and 'Flow control' under Configure
the serial line. Click Session and select Serial under Connection type.
HyperTerminal
PuTTY