CHDBT-1H2CE 1×3 HDMI over HDMI and CAT5e/6/7 Splitter with PoE and LAN Serving Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������� 1 2. Applications ������������������������������������������� 1 3. Package Contents �������������������������������� 1 4. System Requirements ���������������������������� 2 5. Features �������������������������������������������������� 2 6. Operation Controls and Functions ������� 3 6.1 Front Panel ����������������������������������������3 6.2 Rear Panel �����������������������������������������4 6.
1. INTRODUCTION The HDMI Splitter over HDMI and CAT5e/6/7 supports resolutions up to 1080p Full HD, Deep Color, 4K×2K, 3D and multi-channel digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD from Hi-Def sources to an HDMI and 2 CAT5e/6/7 outputs. This splitter has the ability to provide you with simultaneous HDMI and 2 CAT5e/6/7 outputs where the HDMI output can be connected to display or cascaded with another splitter.
4. SYSTEM REQUIREMENTS • HDMI equipped source device, connected with an HDMI cable or DVI equipped source, connected with DVI to HDMI cables • HDMI equipped displays (TVs or monitors) or HDMI equipped AV receivers, connected with HDMI cables • Industry standard CAT5e/6/7 cables • HDBaseT™ Receivers (i.e. CH-506RX, CH-507RX or CH-1109RX) 5.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel HDMI OUT DC 24V HDMI IN LINK POWER SERVICE RS232 IN RS232 IN A B 1 2 3 4 5 6 7 1 RS232 IN A/B: Connect to a PC/laptop or RS-232 control system (with supplied 3.5mm phone jack to D-Sub 9 pin adaptor) for the transmission of RS-232 commands. 2 HDMI OUT: Connect to a HDMI equipped TV/monitor for display of the HDMI input source signal. 3 HDMI IN: Connect to HDMI source equipment such as a DVD or Blu-ray player.
6.2 Rear Panel LAN 2 3 IR A1 Extender IR A2 Blaster CAT5e/6 OUT A MODE 1 LINK 4 2 3 IR B1 Extender IR B2 Blaster CAT5e/6 OUT B LINK MODE 4 1 LAN: Connect to an active network for LAN serving. When any compatible LAN equipped receivers are connected, this allows the network access (including internet access if available) to be shared between any connected LAN equipped receivers. Connect any Ethernet equipped device e.g.
6.3 IR Cable Pin Assignment Twin IR Blaster 1 Power 3.3 V 2 IR Blaster Signal 3 NC 1 IR Signal 2 Power 3.
7.
8. SPECIFICATIONS Video Bandwidth Input Ports 340 Mbps/10.2 Gbps 1×HDMI, 2×IR Extender, 2×RS-232 (3.5 mm Mini-jack),1×LAN (Ethernet),1×USB (Service Output Ports HDMI Resolutions HDMI Cable Distances only) 1×HDMI, 2×CAT5e/6/7, 2×IR Blaster Up to 4K×2K 15 m@1080p/8-bit, 10 m@1080p/12-bit, Power Supply 5 m@4K×2K 24 V/2.
9.
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.