Specifications

Open CTM (Revision D)

151

Report Messages

cmd wpanpanid queries the current WPAN PAN ID

Note: A cmd save and a power cycle must occur for the new settings to take effect.

return to list of commands

wpanpensrv x yyyy

Configure the listening protocol and port of the Pendant Server that provides remote access to Man

Down Pendant devices.

x = 0 UDP protocol (default)

x = 1 TCP protocol

yyyy = 0 to 65535 port number of listening port, in decimal (0 = disabled, default)

Using wpanpensrv without arguments returns the currently configured protocol and port in the

Chameleon Modem.

Note:

If the modem is currently in WPAN Gateway mode, mode 10, and any other LAN or firewall configuration

commands are set after issuing the wpanpensrv command, then both a cmd save and a power cycle are

required to resume proper remote access to pendant devices through wpanpensrv.

Example:

cmd wpanpensrv 0 21001 change the Pendant Server to listen on UDP port 21001

cmd wpanpensrv 1 21002 change the Pendant Server to listen on TCP port 21002

cmd wpanpensrv queries the current Pendant Server settings

A cmd save and a power cycle must occur for the new settings to take effect.