Specifications

Open CTM (Revision D)

Command Reference

pppppppppp phone number which the SMS report will be sent to. For long distance calls, a “1” needs to

be added In front of the phone number.

(leave blank to clear the phone number)

<email address> email address which the SMS report will be sent to.

(leave blank to clear the address)

The current SMS destination configured for all IO reports can be queried by using the iosms command

without parameters.

Examples:

cmd iosms 1 1234567890 sends IO report #1 as an SMS message to the specified phone number

cmd iosms 2 me@… sends IO report #2 as an SMS message to the specified email address

cmd iosms 1 clears the SMS destination for IO report #1

cmd iosms queries the phone numbers or email addresses for all IO SMS reports

A cmd save is required for this command to take effect.

return to list of commands

ipadr

Queries the IP address assigned to the modem by the wireless network.

This is a read only command.

Example:

1. Query the current IP address of the modem

cmd ipadr

96.2.1.161

return to list of commands

8.1.9 “L” Commands

landhcp ddd n (Firmware version R1.3.x)

Configures the LAN dynamic host configuration protocol (DHCP) server settings, specifically the starting IP

address to assign to DHCP users and the maximum number of DHCP users on the LAN.

ddd = 0 to 255 Last number of starting DHCP IP address in decimal (default: 20)

n = 1 to 254 Maximum number of DHCP clients (default: 10)