Specifications

Open CTM (Revision D)

Command Reference

obdreport [n] [r]

This command sets the report to be used for a OBD triggered report.

n = 1 to 8 number of the OBD trigger condition

r = 1 to 999 report number

r = 0 disables the report

obdreport requires the modem to be listening for traffic from the WPAN gateway, this requires cmd

mode 10 to be configured.

Example:

1. Set report #2 for OBD triggered report #1.

cmd obdreport 1 2

A cmd save is required for this command to take effect.

See also: mode, obdcond, repaddmes, repdelmes, repemail, replocport, repremip, repremport, repsms,

reptype

return to list of commands

obdsp n

Sets the protocol used by the OBDII transmitter.

n = 0 Automatic

n = 1 SAE J1850 PWM

n = 2 SAE J1850 VPW

n = 3 ISO 9141-2

n = 4 ISO 14230-4 KWP (slow)

n = 5 ISO 14230-4 KWP (fast)

n = 6 ISO 15765-4 CAN (11 bit ID, 500 Kbaud)

n = 7 ISO 15765-4 CAN (29 bit ID, 500 Kbaud)

n = 8 ISO 15765-4 CAN (11 bit ID, 250 Kbaud)

n = 9 ISO 15765-4 CAN (29 bit ID, 250 Kbaud)

n = 10 SAE J1939 CAN (29 bit ID, 250 Kbaud)

n = 11 USER1 CAN (11 bit ID, 125 Kbaud)

n = 12 USER2 CAN (11 bit ID, 50 Kbaud)