Specifications

6.3 EDID Update Procedure

Please follow this procedure if there is no image displayed or it is

displayed incorrectly.

A. Please ensure that the display output settings of the source input

device (such as a Blu-ray player or HD Camcorder) is set to

“Automatic”. If the source image is displayed correctly no further

action is necessary but if not to step B.

DVD Player

Converter

SDI Monitor

HDMI SDI

B. Connect the HDMI source directly (without connecting to the

Converter) to a HDMI monitor or TV to see if the image is displayed

correctly. Ensure that the source's output timing supports SDI or the

Converter's timing. If it is supported, go to step C. If not, please try

a different monitor or TV and adjust the timing until the image is

displayed correctly.

DVD Player

HDMI

TV/Monitor

Adjust to correct SDI Timing

(HDMI Cable)

C. Connect the HDMI monitor or TV to the input port of the Converter

and then set the EDID switch to the 'EDID update' position. Press

and hold the EDID update button consistantly until the Video Lock

LED illuminates. This will allow the Converter to replace the default

EDID settings with the monitor/TV’s EDID settings.

HDMI

TV/Monitor

1. Move the EDID switch to EDID update position

2. Press and hold the EDID update button

(HDMI Cable)

Converter