Specifications

3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
EDID
Update
3G
HD
SD
3G SDI
Out 1Out 2
HDMI/DVI
Video Lock
HD EDID
3G EDID
HDMI to 3G SDI
CLUX-H2SDI
2 1 3 6
5 74 8
9
1
EDID Switch: Use this switch to select between the built-in or to
update the EDID settings. Default EDID settings as shown below:
3G EDID

Native Mode 1080p@60
HD EDID

Native Mode 1080i@60
EDID update

Native Mode 720p@60
2
EDID Update button: Only use this function when the image has
not displayed correctly after trying to switch the EDID Update/
HD/3G mode with the EDID switch (refer to Section 6.3 for update
procedure).
3
HDMI/DVI LED: The LED will illuminate green only when the input
source is HDMI. It will not illuminate when the input is DVI.
4
Video Lock LED: The LED will illuminate yellow when the HDMI input
is receiving and locking a signal.
5
EDID Update LED: The LED will illuminate red when the EDID settings
are being updated (refer to Section 6.4 LED Signal Chart).
6
SD LED: The LED will illuminate green when the HDMI input signal is
480i/576i.
7
3G LED: The LED will illuminate red when the HDMI input signal is
1080p@50/60.
8
HD LED: The LED will illuminate yellow when the input HDMI input
signal is 1080p@24/25/30, 1080i@50/60 or 720p@50/60.