Scart/Video to HDMI Scaler Box Operation Manual CM-393
(1). Introduction: Congratulations on your purchase of the Cypress Video Scaler CM-393. Our professional Video Scaler products have been serving the industry for many years. In addition to Video Scalers, Cypress offers a full line of high quality PC multimedia,Standard Converters, HDMI/DVI Splitters and Switchers Video Mixer, Time Base Correctors,and Video Processors. Please visit www.cypress.com.tw to learn more details about these products. This manual includes operation information on the CM-393 model.
(4). Operation Controls and Functions: Front Panel POWER 1 3 INPUT MENU 2 4 5 6 1. Power button and LED indicator: Press the button once to power on the unit, Press again to power off (Standby). when the unit is powered on, the LED illuminates in green. When the unit is in standby the LED illuminates in RED. To complete power off the unit disconnect the power cable from the power plug on the back of the unit. 2.
. CV Audio in: Stereo audio input associated with composite video in via 3.5 mm phone jack. 5. SV audio in: Stereo audio in associated with S-Video in via 3.5 mm phone jack. 6. CV-IN: Use a Composite video cable to connect the composite video output of the source equipment to this composite video(CV) input of the scaler. 7. S-Video: Use a S-Video cable to connect the S-Video output of the source video equipment to this " S-Video" input on the back of the video Scaler.
Picture Adjust When Picture Adjust is selected a sub menu as below appears. BRIGHT CONTRAST COLOR TINT SHARP RESET EXIT Default 32 32 32 16 03 Range 0-64 0-64 0-64 0-32 0-8 USE +,- to move the tick (V) to your desired adjust item, Press the Menu/Enter to confirm your selection. At this point, the selected parameter will turn red, and you can use +,- to increase or decrease the value of the parameter. When adjustment is complete, Press "Menu" to leave the parameter.