Specifications
8. OSD
1. Press the select input button once to switch between CV/SV input. If the
source is disconnected the OSD will show
“
No Signal
”
.
2. Enter the OSD menu.
3. When the device is in PC mode the OSD will display the input format,
output timing, user selectable output timings, the detected source as
well as the PC monitor
’
s EDID and firmware version as shown in the above
screen capture.
4. When in HD mode the OSD will display the input format, output timing,
frame rate options, video system and the firmware version as shown in the
below screen capture.
5. Press the Select Input button to cycle through the different timings until you
reach your desired timing.
←
INput Format / Output Resolution
←
Firmware Information
←
PC Monitor Infomation
←
Input Format / Output Resolution
←
Firmware Information
IN CVBS
OUT 480p60
6