Specifications

7. Operation Controls and Functions
7.1 Front Panel
①
. Remote control sensor.
②
. Power switch & LED Indicator: This LED will illuminate when the power is
turned on.
③
. Input Select/Indicators (A/B/C/D): Press each
“
HDMI out
”
button
repeatedly to switch to your desired source. The LED that illuminates to
indicate the input source being selected and routed to HDMI A display.
④
. HDCP indicators: This LED will illuminate once the input source being
played comes with a HDCP protection.
⑤
. HDMI/DVI indicators: When the input is HDMI content, this LED will
illuminate. When playing DVI from the input source, this LED will not
illuminate.
7.2 Rear Panel
①
. EDID Control Switcher: Default factory setting is on TV, leave as it is when
the display is displaying properly. Switch to STD to use built-in EDID.
Note:
1. When EDID is switched to TV, the unit will detect the rst HDMI output
source
’
s EDID and record it in the unit. If the rst detected output
source is DVI, it will skip onto the next source until the rst HDMI source
is detected. The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.
CMLUX-4H4CAT
HDMI V1.3 to CAT6 4X4 Matrix
POWER 1 2 3 4 HDCP HDMI/DVI 1 2 3 4 HDCP HDMI/DVI 1 2 3 4 HDCP HDMI/DVI 1 2 3 4 HDCP HDMI/DVI
IN IN IN IN
A BHDMI OUT C D
①
② ③ ④⑤
CAT6 OUTPUT
HDMI INPUT
STD TV DDC VIDEO
EDID
RS-232
4
3 2 1
DC 5V
D
DDC VIDEO
C
DDC VIDEO
B
DDC VIDEO
A
IR OUT
4 3 2 1
IN OUT
IR MAIN
③ ④ ⑤ ⑥⑦⑧
①
②
4