Specifications

7.2 Rear Panel
① ② ④ ⑤ ⑥ ⑦③
①
HDMI OUTPUT A~H: These slots are where you connect the HDMI displays.
②
SERVICE: This slot is where you connect a D-sub 9 male pin connector
cable to your host, in order to upgrade your firmware.
③
RS-232: This slot is where you connect a D-sub 9 female pin connector
cable to your host so you can control an 8x8 HDMI Matrix.
④
USB SERVICE: This slot is where you connect a USB b type connector cable
to your host for ISP (System Program) firmware burning, for a total of four.
⑤
IR IN: This slot is where you can extend your IR receiver with an IR extender
cable that accepts only 38KHz.
⑥
HDMI INPUT 1~8: These slots are where you connect the output cable of
your HDMI or DVI source, such as DVD players or Set Top Boxes.
⑦
DC 24V: Plug the 24V DC power supply into the unit and connect the
adaptor to an AC wall outlet.
7