Specifications

8. Remote Control
This remote control can be set with multipal format
according to the dipswitch setting. There are total
of four dipswitches with mainly two kinds of settings.
When dipswitches are all set to ON/
↑
the remote
control is able to control all outputs and all inputs.
For example, when output A wish to select input
5. Press 1 first and wait for a second then press 5,
the output display A will display input source 5
’
s
image instantly. Other settings referring to below
section 8.2 section 8.2 are output based to control
input selections. For example, when all dipswitches
are set to OFF/
↓
this setting is base on output A
and therefore, it can only control inputs selection.
Hence, when output A wish to selelct input 3 press
3 only will switch output display A to display input
source 3
’
s contents. Further setting please refers to
section 8.2.
8.1 IR Custom Code
NO. DATA
1 88
2 89
3 8A
4 8C
5 8D
6 8E
7 90
8 91
9 92
0 95
8.2 Discrete IR codes for 8x8 HDMI matrix (IR3)
Select /
Dipswitch
input
1
input
2
input
3
input
4
input
5
input
6
input
7
input
8
output A
↓↓↓↓
0cx88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91
output B
↑↓↓↓
0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91
output C
↓↑↓↓
0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91
output D
↑↑↓↓
0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91
output E
↓↓↑↓
0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91
output F
↑↓↑↓
0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91
output G
↓↑↑↓
0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91
output H
↑
↑↑↓
0x88 0x89 0x8A 0x8C 0x8D 0x8E 0x90 0x91
CR-71
1 2
3
4 5
6
7
8
0
9
8