CMLUX-88S 8 by 8 HDMI V1.
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
Table of Contents 1. Introduction ……………………..……………………...…........….……. 1 2. Applications …………………..………………….……...................….. 1 3. Package Contents ………………………...........……….................… 1 4. System Requirements ……………..……….........………............……. 1 5. Features …………………………………………......……........…...…… 2 6. Specifications ………………………………...……..........………....…. 3 7. Operation Controls and Functions ……………...……..............…… 7.1 Front Panel .............................................
1. Introduction While HDMI matrix are getting more and more popular it just feed up the market with higher and higher demand on more inputs and outputs matrix. 8 by 8 HDMI Matrix provides the excellent solution for connecting all the devices and sources together for convenience use, it also provides a variety of choices on where to play the images with existing remote controller. Further, 8 by 8 HDMI V1.
5. Features HDMI 1.3, HDCP 1.1 and DVI 1.
6.
7. Operation Controls and Functions The following sections describe the hardware components of the unit. 7.1 Front Panel ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ① LCM monitor: This monitor displays your setting information with each output and input selection. ② IR sensor. ③ POWER: Press this button to turn on the system. When system is ON the LED will illuminate in GREEN. Press it again to enter into STANDBY mode, the LED will illuminate in RED. ④ EDID: Press this button to select the EDID function from the LCM.
⑤ LOCK: Press this button to lock all functions and press it again to release the lock function. When LED illuminate in GREED, lock function is activate. If the LED is not illuminate, the key lock is released. ⑥ ENTER: Press this button after each and every selection to confirm the setting. If this button is not pressed after 20 second of the selection, the selection will be avoid. ⑦ ALL: Press this button to set all the outputs to display with the same input.
7.2 Rear Panel ① ② ③ ④ ⑤ ⑥ ⑦ ① HDMI OUTPUT A~H: These slots are where you connect to the HDMI displays. ② SERVICE: This slot is where you connect with a D-Sub 9 pin male connector cable to your host side for firmware upgrading. ③ RS-232: This slot is where you connect with a D-Sub 9 pin female connector cable to your host side for controlling 8 by 8 HDMI Matrix.
8. Remote Control ① Power: Press this button to turn ON/Standby the system. ② 1~0: These numbers buttons are for output and input port selection buttons. First select your desire output port (01~08) follow by input port (01~08) and press enter. Example: when users wish to select output 1 to display input source 2 then users will need to press 0102 + enter buttons. The green LED on top of the entry button in the front panel will blink when users push these buttons.
10. RS-232 Protocols 10.
10.
PORT 47 Output D select Input7 PORT 48 Output D select Input8 PORT 51 Output E select Input1 PORT 52 Output E select Input2 PORT 53 Output E select Input3 PORT 54 Output E select Input4 PORT 55 Output E select Input5 PORT 56 Output E select Input6 PORT 57 Output E select Input7 PORT 58 Output E select Input8 PORT 61 Output F select Input1 PORT 62 Output F select Input2 PORT 63 Output F select Input3 PORT 64 Output F select Input4 PORT 65 Output F select Input5 PORT 66 Output F
11.
A Acronyms Acronym Complete Term DTS Digital Theater System DVI Digital Visual Interface EDID Extedned Display Identification Data HDCP High-bandwith Digital Content Protection HDMI High-Definition Multimedia Interface HDTV High-Definition Television LCM Liquid Crystal Monitor USB Universal Serial Bus UXGA Ultra Extended Graphics Array VGA Video Graphics Array 12
CYPRESS TECHNOLOGY CO., LTD. Home page: http://www.cypress.com.