Specifications

7.2 Rear Panel
①
HDMI OUTPUT A~H: These slots are where you connect to the HDMI
displays.
②
SERVICE: This slot is where you connect with a D-Sub 9 pin male connector
cable to your host side for firmware upgrading.
③
RS-232: This slot is where you connect with a D-Sub 9 pin female connector
cable to your host side for controlling 8 by 8 HDMI Matrix.
④
USB SERVICE: This slot is where you connect with a USB B type connector
cable to your host side for ISP (System Program) firmware burning CS8957
total of 4.
⑤
IR IN: This slot is where you can extend your IR receiver with IR extender
cable that accepts only 38KHz.
⑥
HDMI INPUT 1~8: These slots are where you connect the HDMI or DVI
output of your source equipments such as DVD player or set-top-box.
⑦
DC 24V: Plug the 24V DC power supply into the unit and connect the
adaptor to AC wall outlet.
① ⑥⑤② ③ ④ ⑦
6