CMPRO-4H2H 4 by 2 HDMI Matrix Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������� 1 2. Applications ������������������������������������������� 1 3. Package Contents �������������������������������� 1 4. System Requirements ���������������������������� 1 5. Features �������������������������������������������������� 1 6. Operation Controls and Functions ������� 2 6.1 Front Panel ����������������������������������������2 6.2 Rear Panel �����������������������������������������3 6.
1. INTRODUCTION The 4 by 4/4 by 2 HDMI matrix with 4kx2k supported which allows HDMI signal from any of its four sources to be routed to and displayed on any of its four/two connected HDMI displays simultaneously. It supports 3D, 3Gbps bandwidth, 16-bit Deep Color, Hi-Def lossless audio and other features defined by HDMI specifications. The management of source/ sink scenarios can be operated easily through on-panel buttons, IR remote control, RS-232 or Web GUI controls. 2.
. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel POWER EDID A B 1 2 3 4 A B CMPRO-4H2H 4X2 HDMI MATRIX 1 2 3 4 5 1 IR IR receiver window accepts the remote control signal of this device. 2 POWER & LED Press this button to power the device on/off. The LED will illuminate when the power is on. 3 EDID & LED Press this button to use the internal/STD or external/TV EDID. The LED will illuminate when STD EDID is selected.
6.2 Rear Panel OUTPUT INPUT 1 2 3 4 A B RS232 ETHERNET POWER DC 5V SERVICE 1 2 3 4 5 6 1 INPUT 1~4 Connect input source equipments such as DVD/Blu-ray players with HDMI cables. 2 OUTPUT A/B Connect to HDMI 3D TV/display or monitor for both audio and video or moving/static graphic play. 3 RS-232 Connect to a PC or laptop with D-Sub 9-pin male cable for the transmission of RS-232 commands. 4 ETHERNET Connect to an internet or network activate device.
6.3 Remote Control POWER 1 POWER Press this button to switch on or set to standby mode of the device. 2 OUTPUT A 1~4 Press buttons 1~4 to selection the nominated input for output A. 1 OUTPUT A 2 OUTPUT B 3 OUTPUT C 4 OUTPUT D 5 3 OUTPUT B 1~4 Press buttons 1~4 to selection the nominated input for output B. CR-33 6.
6.5 RS-232 Protocols Command Description A1~A4 Switch Output A to 1~4 B1~B4 Switch Output B to 1~4 C1~C4 Switch Output C to 1~4 D1~D4 Switch Output D to 1~4 ABC...1~ABC...4 Switch Output A B C... to 1~4 at the same time SETIP Setting IP. SubNet.
6.6 Web GUI Control On a PC/Laptop that is connected to the same active network as the Matrix, open a web browser and type device's IP address(get from RS-232's help command or use the default IP: 192.168.0.1) on the web address entry bar. The browser will display the device's status, control and User setting pages. Click on the 'Control' tab to control power, input/output ports, EDID and reset mode.
Clicking on the 'Setting' tab allows you to reset the IP confi guration. The system will ask for a reboot of the device every time any of the settings are changed. The IP address needed to access the Web GUI control will also need to be changed accordingly on the web address entry bar.
7.
8. SPECIFICATIONS Video Bandwidth 300Mbps /10.
9.
11
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.
