Specifications

ManualsBrandsCypress ManualsComputer equipmentCP-255D

Specifications:

HDMI 1.2 Compliant

Input format (Up to 165MHz) Output format (Up to 165MHz)

for CP-255D for CP-255D

* 480i 30x2 / 576i 25x2 * 480i 30x2 / 576i 25x2

Input connectors:

- YCbCr/YPbPr x 1 via 3 RCA jack

- PC RGB x 1 via 15 pin D-sub

- DVI (CP-255D)x 1

Output connector:

- DVI (CP-255D)x 1

- PC 15 pin D-sub x 1 (CP-255D)

Dimension: 180(W)x124(D)x25(H)mm

Weigh: 600gs

DC 5V 2.6 Amp

480i/576i

480p/576p

720p@(60/50)

1080i@(60/50)

1080p@(60/50)

VGA@(60/72/75/85)

SVGA@(56/60/72/75/85)

XGA@(60/70/75/85)

SXGA@(60/75/85)

UXGA@60

WXGA@60(1280X800)

WSXGA@60(1680X1050)

WUXGA@60(1920X1200)

Resolution

INPUT

Component D-SUB DVI/HDMI

OUTPUT

D-SUB DVI/HDMI

480i/576i

480p/576p

720p@(60/50)

1080i@(60/50)

1080p@(60/50)

VGA@(60/72/75/85)

SVGA@(56/60/72/75/85)

XGA@(60/70/75/85)

SXGA@(60/75/85)

UXGA@60

WXGA@60(1280X800)

WSXGA@60(1680X1050)

WUXGA@60(1920X1200)

Resolution

V(@60)

(1).Introduction

Congratulations on your purchase of the Cypress Video Scaler CP-255D.

Our professional Video Scaler products have been serving the industry for

many years.

In addition to Video Scalers, Cypress offers a full line of high quality PC

multimedia, Standard Converters, Video Mixer, Time Base Correctors, Video

Processors, and HDMI/DVI devices.

Please visit www.cypress.com.tw to learn more details about these products.

This manual includes operation information on the CP-255D model. Please

read this to become familiar with the CP-255D and keep the manual for

possible reference in the future.

Cypress's CP-255D is designed to convert PC, SD, HD and DVI to digital DVI at

a variety of HDTV and PC resolutions. It handles input and output signal at 205

MHZ ultra high bandwidth. Cypress CP-255D has many great features to

enhance video performance and is ideal for use in professional large screen

presentation.

(2).Features

1. CP-255D is a high bandwidth and professional PC/Component/DVI to DVI

Scaler that accepts PC RGB (up to UXGA), HD Component (480i up to

1080p) and DVI (up to WUXGA) and scale them up to DVI-I output

(1080p/WUXGA).

2. The input to the CP-255D is analog PC or HDTV signal in the format of

either RGBHV, YPbPr, (YCbCr) or digital DVI.

3. The output of the CP-255D is digital DVI plus analog PC/HD with

selectable output resolution from 480i to 1080p and VGA to WUXGA.

4. The input resolution is automatically detected while the output resolution

and refresh rate can be selected through OSD menu or front panel push

buttons.

5. Native output resolution ensures most optimal display resolution on your

screen. When "Native" is selected as the output resolution, the CP-255D will

automatically detect the native resolution of the display and send out the

most optimal pixel timing to match TV's final display resolution.

6. Output picture adjustment on brightness, contrast, color, RGB level, and

H-V position.

7. The DVI input is HDCP compliant which means if input is HDCP encrypted

then DVI output is also HDCP encripted. In this case the PC analog output

will be turned off.

8. Includes advanced features such as Noise Reduction and overscan/

underscan adjustment.

(3).What's included

The following items are included in the standard package.

1. PC/HD/DVI to DVI scaler box.

2. VGA cable x 1

3. YPbPr 3RCA cable x 1

4. AC power adaptor 5V/ 2A, center positive.

YPbPr (YCbCr) PC DVI

(4).Operation Controls and Functions

Front Panel

1. Power: Press the button to turn ON or turn OFF (standby) the power of the unit.

2. Menu/Enter: This button serves two purposes.

a. Press the button to bring up OSD main menu as shown in the

"OSD Operation". (page 7)

b. To act as a "Enter" key to enter sub menu or to adjust setting value of the

selected parameter.

3. +/- button:

The buttons provide 3 functions:

a. Input select ("+"): Press the "+" button repeatedly to select your desired

input source. The input sources are toggled through in the following

sequence.

b. Auto Tune ("-"): Press the "-" button to carry out picture auto adjust for

analog inputs (component or PC). The CP-255D will fine tune the position

(centering) and color of the output picture.

c. When in the OSD menu mode: Press the +, - button to move up or down

the highlight bar to your desired parameter. Or once a parameter is

selected with MENU/Enter button, press the button to adjust setting value

of your selected parameter.

4. Input LED Indicators: When one of the LED illuminates its corresponding source

is being selected as input.

5. IR Sensor: Infrad remote control sensor.

6. Component Input: Connects this input connector to the Component output

connector of your source equipment using the enclosed 3RCA to 3RCA

cable.

The CP-255D accepts both interlaced component input (480i, 576i) and

deinterlaced progressive input (480p, 576p...1080p).

The input range is 480i, 570i~1080i, 1080p.

Rear Panel

1. PC input: Connects this PC input connector to the VGA output of your

PC. The acceptable PC resolutions range from VGA~WUXGA.

125 36 4

Y/HD

Cb/Pb

Cr/Pr

PC DVI

MENU POWERINPUT

ENTER

INPUT

AUTO

ADJUST

5 4 3 2 1

PC OUTDVI OUT PC INDVI IN

DC 5V

Component PC DVI

2. DVI input: Connects this DVI input connector to the DVI output connector of

your DVI source equipment. The DVI input should be digital DVI only and

should not include analog RGB signal.

The use of DVI-I connector is to ensure both DVI-I and DVI-D male connector

of the DVI cable can fit into this input connector. The digital DVI input

resloution can range from 480i~1080p, or VGA~WUXGA.

3. PC-D sub out: The connector for scaled analog RGB output.

Connect this output port to the analog PC RGB input of your monitor, or

connect it to the RGBHV input of your HD display using D-sub to 5 BNC

adaptor cable. (not included in the package)

Note: When input is a HDCP encrypted DVI signal this analog output will be

turned off.

4. DVI output: Scaled digital DVI output. Connect this output to the DVI input or

HDMI input of your Digital display.

Note: When input is a HDCP encrypted DVI signal the DVI output is also HDCP

encrypted. The monitor/display that connected to this output also need to

be HDCP compliant in order to get a nice and clean picture. A non-HDCP

compliant display can only display non-HDCP signal and picture will

become noise when input is a HDCP-encrypted signal.

5. Power jack: Connect to the 5V 2A DC power adaptor.

Remote Control and functions:

1. Power: Press the button once to power on the CP-255D. Press again to enter

standby mode.

2. Input: Press the button repeatedly to toggle through various input sources as

follows.

3. HD input: Press the button to select component input.

4. PC input: Press the button to select PC input.

5. HDMI/DVI input: Press the button to select DVI (or HDMI) input.

6. Output resolution:

Select buttons: Press any one of the button to directly

select output resolution.

For other output resolutions that are not

covered by these buttons please enter

Menu/Output page to select them.

7. MENU: Press the button to bring up OSD main menu page.

8. Exit: Press the button to exit from a sub menu or main

menu.

9. Up/Down/Left/Right: Press the Up/Down button to move

the highlight bar to your desired

parameter during the OSD operation.

Press the Left/Right button to increase/

decrease the setting value of a

selected parameter.

10. OK (Enter): Press the button to confirm your selection.

11. Reset: Press the button to reset the unit's firmware setting to the factory

default value.

12. Auto Adjust: Press the button to optimize the position of the picture

(picture centering) on the screen.

(5).Installation

Input Connection

PC OUTDVI OUT PC INDVI IN

DC 5V

HDMI

Cable

DVI

HDMI out

DVD

DVI out

STB

DVI

Cable

PC-in

HDMI to DVI

connector

adaptor

Component out

DVD or Set Top Box

Component in

Y/HD

Cb/Pb

Cr/Pr

PC DVI

MENU POWERINPUT

ENTER

INPUT

AUTO

ADJUST