Specifications

5
The CP-255H accepts component, PC and HDMI inputs with audio on each.
The formats supported by these inputs are as follows:
- When connecting to a PC source use a 15-pin D-sub cable to connect the
output of a PC to the D-Sub input connector of the CP-255H.
- When connecting to a component source (either SD or HD resolution) use a
3RCA to 3RCA cable to connect the YPbPr or YCbCr output of a DVD or Set
Top Box to the Y-Cb/Pb-Cr/Pr input connecter of the CP-255H.
- When connecting to a HDMI source, use a HDMI cable to connect the HDMI
output of a STB or DVD to the HDMI input connector of the CP-255H.
- When connecting to a DVI source, use a DVI cable to connect to the DVI
output of a DVI source, such as DVD or PC, on the one end. And use a DVI to
HDMI connector adaptor to connect to the other end of the DVI cable. The
HDMI connector of the adaptor is then connect to the HDMI input of the
CP-255H.
The CP-255H can automatically detect the input resolution of all three inputs.
To switch from one input source to another just press the input button on the
front panel ("+") or on the remote control.
Output Connection
The CP-255H can output a variety of PC, SD and HD resolutions in HDMI digital
format.
DVI TV
HDMI TV
or
HDMI
cable
HDMI
cable
HDMI
HDMI OUT HDMI IN
PC IN
PC
AUDIO IN
AUX
AUDIO IN
DC 5V
HDMI
HDMI
HDMI
HDMI
HDMI to DVI
connector
adaptor