Specifications
5
6.5 Rear Panel
DC 5V
OUTPUTCOAX OUT
1 2 3
1
COAX OUT: Connect to the co-axial input on an AV Receiver for
digital audio output. When the HDMI input signal has the Audio
Return Channel (ARC) activated, the audio from the HDTV will be
output from the co-axial output. If the ARC function is not active
then the audio from the source device will be output.
2
OUTPUT: Connect to a HDMI equipped TV/monitor or AV receiver
for display of the selected HDMI source signal.
3
DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC outlet. The LED will light when connected to
power.
Note:
1. This device only supports 2 Channel PCM only.
2. The display must support the ARC function and must be active for
this feature to function.
3. The display's ARC enabled HDMI connection must be connected
to the device.
6.6 Remote Control
1
MENU: Press to enter the OSD menu.
2
ENTER: Press to conrm the selection.
3
INPUT 1/2/3/4: Press to directly select the
required input.
4
pqtu
: Use the directional keys to
navigate the OSD menu and adjust the
settings.
CR-88*A
ENTERMENU
1
2
3
4
1
3
2
4