Specifications

12
6.7 Telnet Control
Before attempting to use the telnet control, please ensure that both
the Scaler (via the 'LAN port) and the PC/Laptop are connected to
the active networks. To access the telnet control in Windows 7, click
on the "Start" menu and type "cmd" in the Search eld then press
enter. Under Windows XP go to the "Start" menu and click on "Run",
type "cmd" with then press enter. Under Mac OS X, go to Go→Applica
tions→Utilities→Terminal See below for reference.
Once in the command line interface (CLI) type "telnet", the IP address
of the unit you wish to control.
Note: The IP address can be found from OSD menu under Information.