Specifications
4
DVD player for both video and audio signal sending.
CV + L/R: Connect to source equipment such as video/DVD player
for both video and audio signal sending.
6
CONTROL:
This port is the link for Telnet or Web GUI controls, connect to an
active Ethernet link with an RJ45 terminated cable (for further
details, please refer to section 6.7 & 6.8.
7
POWER:
Switch this power toggle to turn ON and activate the device or to
turn OFF and shut it down.
8
DC 5V:
Plug the power adaptor included in the package and connect it
to the AC wall outlet for power supply.
6.3 Remote Control
1
POWER: Press this button to switch
ON or set the device to standby
mode. The device must connect
with power supply and the power
toggle must switch to ON.
2
HDMI1~3/PC1~3/CV/COMP: Press
these hot keys to switch input
source instantly.
3
EXIT: Press this button to exit the
menu or the current selection under
OSD.
4
MENU: Press this button to enter into
the OSD menu.
5
OK & ▲▼◄►: Press [OK] to
conrm the selection or press the
arrow buttons to scroll in the OSD
selections.
6
RESET: Press this button to set the
device back into the factory default
setting.
7
AUTO ADJUST: Press this button
when output image is not tting the display's screen perfectly. The
device will auto adjust the image to full screen.
CR-122
POWER
PC1PC2 PC3
CV COMP
EXIT MENU
OK
RESET
AUTO
ADJUST
3
6
1
4
7
5
8
2
HDMI2HDMI1 HDMI3