CSLUX-300I Digital Video Scaler Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction............................................ 1 2. Applications ........................................... 1 3. Package Contents ................................ 1 4. System Requirements............................ 1 5. Features .................................................. 2 6. Operation Controls and Functions....... 3 6.1 Front Panel ........................................ 3 6.2 Rear Panel......................................... 4 6.3 Remote Control..........................
1. INTRODUCTION The Digital Video Scaler has CV, SV, HD, Component, PC, HDMI and SDI inputs and can scale the signal into HDMI, VGA with audio output ports plus a SDI loop out. This high performance digital video scaler supports HDMI output resolution up to 1080p /WUXGA and Analog Digital Conversion (ADC) & Digital Analog Conversion (DAC) allowing a wide range of AV signal to be insert to a high-Definition signal and displaying.
. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel CSLUX-300I DIGITAL VIDEO SCALER XGA POW ER IR INPUT CV SV COMP PC HDMI 1 HDMI 2 SDI ME NU - + ENTER 720P 1 2 3 4 5 6 1 POWER & LED: Press this button to switch ON or set the device to standby mode. Once the device is connected with power supply the LED will illuminate and the device will switch to ON automatically. 2 IR: This IR window receives only the IR signal from the remote control included in the package.
6.2 Rear Panel 2 3 4 5 6 RS232 OPTICAL OPTICAL SERVICE 1 SERVICE 2 L/R R L/R PC/HD SDI LOOP OUTPUT HDMI L CV R L DC 5V SDI PC HDMI 1 HDMI 2 Cr/Pr Cb/Pb Y SV R L 1 7 1 OUTPUT: L/R: Connect to speaker or amplifier for audio output in stereo format. HDMI: Connect to HDMI display or amplifier for video or video and audio display. OPTICAL: Connect to speaker or amplifier for audio output in digital format. PC/HD: Connect to monitor/display for video output display.
HDMI 2: Connect to HDMI source equipment such as Blu-ray/DVD player for both video and audio signal sending. L/R: Connect to source equipment’s L/R output with 3.5Ø phone jack for audio signal sending. PC/HD: Connect with PC/NB source equipment for video signal input with D-Sub 15pin cable. OPTICAL: Connect to source equipment’s optical output for audio signal sending. YCbCr/HDPbPr + L/R: Connect to source equipment such as video/ DVD player for both video and audio signal sending.
6.3 Remote Control 1 INPUT: Press this button sequentially to switch in between the input sources rotationally. LED will illuminate accordingly to the selected input source. INPUT 2 3 CV SV COMP PC HDMI 1 HDMI 2 2 POWER: Press this button to switch ON or set the device to standby mode. Once the device is connected with power supply. POWER 1 SDI 4 EXIT MENU 5 3 CV/SV/COMP/PC/HDMI1/HDMI2/ SDI: Press these hot keys to switch input source instantly.
6.
6.
R SHARPNESS Inquire sharpness setting S NR 0~3 Noise reduction setting R NR Inquire noise reduction setting S AUDIODELAY 0~3 Audio delay setting R AUDIODELAY Inquire audio delay setting S AUDIOMUTE 0/1 Audio mute setting R AUDIOMUTE Inquire audio mute setting S SDIAUDIO 0~3 SDI Audio CH setting R SDIAUDIO Inquire SDI audio CH setting S AUDIOSELECT 0/1 Audio input setting OFF(0) / LOW (1) / MIDDLE(2) / HIGH(3) OFF(0) / 40ms (1) / 110ms(2) / 150ms(3) ON(0) / MUTE(1) CH1CH2(0), CH3CH4(1)
6.
COLOR COLOR CONTRAST BRIGHTNESS HUE SATURATION SHARPNESS NR. AUDIO VOLUME DELAY SOUND SDI AUDIO AUDIO SELECT (CV, SV, YpbPr, PC only) R G B R OFFSET G OFFSET B OFFSET 0~60 30 0~60 30 0~60 30 0~60 30 0~30 0 OFF LOW MIDDLE HIGH 0~100 OFF 40mS 110mS 150mS ON MUTE CH1 – CH2 CH3 – CH4 CH5 – CH6 CH7 – CH8 ANALOG SPDIF FACTORY RESET SETUP KEY LOCK POWER SAVE INFORMATION INPUT OUTPUT REVISION OFF ON OFF ON Bold characters are Factory default setting.
7. CONNECTION AND INSTALLATION AVR with Optical Input Set-top Box or DVD Player RS232 OPTIC AL OPTIC AL SERVICE 1 SERVICE 2 L/R R L/R PC/ HD SDI LOOP OUTPUT HDMI Composite video and stereo audio from DVD player CV L R L DC 5V SDI PC HDMI 1 HDMI 2 Cr/Pr Cb/Pb Y SV R L Camcorder S-Video and stereo audio from Blu-ray player SDI Monitor Component and stereo audio from DVD player Monitor with 3.
8.
Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F Relative Humidity 20 ~ 90% RH (non-condensing) Power Consumption(W) 10.
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.
CSLUX-300I Digital Video Scaler Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction............................................ 1 2. Applications ........................................... 1 3. Package Contents ................................ 1 4. System Requirements............................ 1 5. Features .................................................. 2 6. Operation Controls and Functions....... 3 6.1 Front Panel ........................................ 3 6.2 Rear Panel......................................... 4 6.3 Remote Control..........................
1. INTRODUCTION The Digital Video Scaler has CV, SV, HD, Component, PC, HDMI and SDI inputs and can scale the signal into HDMI, VGA with audio output ports plus a SDI loop out. This high performance digital video scaler supports HDMI output resolution up to 1080p /WUXGA and Analog Digital Conversion (ADC) & Digital Analog Conversion (DAC) allowing a wide range of AV signal to be insert to a high-Definition signal and displaying.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel CSLUX-300I DIGITAL VIDEO SCALER XGA POW ER IR INPUT CV SV COMP PC HDMI 1 HDMI 2 SDI ME NU - + ENTER 720P 1 2 3 4 5 6 1 POWER & LED: Press this button to switch ON or set the device to standby mode. Once the device is connected with power supply the LED will illuminate and the device will switch to ON automatically. 2 IR: This IR window receives only the IR signal from the remote control included in the package.
6.2 Rear Panel 2 3 4 5 6 RS232 OPTICAL OPTICAL SERVICE 1 SERVICE 2 L/R R L/R PC/HD SDI LOOP OUTPUT HDMI L CV R L DC 5V SDI PC HDMI 1 HDMI 2 Cr/Pr Cb/Pb Y SV R L 1 7 1 OUTPUT: L/R: Connect to speaker or amplifier for audio output in stereo format. HDMI: Connect to HDMI display or amplifier for video or video and audio display. OPTICAL: Connect to speaker or amplifier for audio output in digital format. PC/HD: Connect to monitor/display for video output display.
HDMI 2: Connect to HDMI source equipment such as Blu-ray/DVD player for both video and audio signal sending. L/R: Connect to source equipment’s L/R output with 3.5Ø phone jack for audio signal sending. PC/HD: Connect with PC/NB source equipment for video signal input with D-Sub 15pin cable. OPTICAL: Connect to source equipment’s optical output for audio signal sending. YCbCr/HDPbPr + L/R: Connect to source equipment such as video/ DVD player for both video and audio signal sending.
6.3 Remote Control 1 INPUT: Press this button sequentially to switch in between the input sources rotationally. LED will illuminate accordingly to the selected input source. INPUT 2 3 CV SV COMP PC HDMI 1 HDMI 2 2 POWER: Press this button to switch ON or set the device to standby mode. Once the device is connected with power supply. POWER 1 SDI 4 EXIT MENU 5 3 CV/SV/COMP/PC/HDMI1/HDMI2/ SDI: Press these hot keys to switch input source instantly.
6.
6.
R SHARPNESS Inquire sharpness setting S NR 0~3 Noise reduction setting R NR Inquire noise reduction setting S AUDIODELAY 0~3 Audio delay setting R AUDIODELAY Inquire audio delay setting S AUDIOMUTE 0/1 Audio mute setting R AUDIOMUTE Inquire audio mute setting S SDIAUDIO 0~3 SDI Audio CH setting R SDIAUDIO Inquire SDI audio CH setting S AUDIOSELECT 0/1 Audio input setting OFF(0) / LOW (1) / MIDDLE(2) / HIGH(3) OFF(0) / 40ms (1) / 110ms(2) / 150ms(3) ON(0) / MUTE(1) CH1CH2(0), CH3CH4(1)
6.
COLOR COLOR CONTRAST BRIGHTNESS HUE SATURATION SHARPNESS NR. AUDIO VOLUME DELAY SOUND SDI AUDIO AUDIO SELECT (CV, SV, YpbPr, PC only) R G B R OFFSET G OFFSET B OFFSET 0~60 30 0~60 30 0~60 30 0~60 30 0~30 0 OFF LOW MIDDLE HIGH 0~100 OFF 40mS 110mS 150mS ON MUTE CH1 – CH2 CH3 – CH4 CH5 – CH6 CH7 – CH8 ANALOG SPDIF FACTORY RESET SETUP KEY LOCK POWER SAVE INFORMATION INPUT OUTPUT REVISION OFF ON OFF ON Bold characters are Factory default setting.
7. CONNECTION AND INSTALLATION AVR with Optical Input Set-top Box or DVD Player RS232 OPTIC AL OPTIC AL SERVICE 1 SERVICE 2 L/R R L/R PC/ HD SDI LOOP OUTPUT HDMI Composite video and stereo audio from DVD player CV L R L DC 5V SDI PC HDMI 1 HDMI 2 Cr/Pr Cb/Pb Y SV R L Camcorder S-Video and stereo audio from Blu-ray player SDI Monitor Component and stereo audio from DVD player Monitor with 3.
8.
Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F Relative Humidity 20 ~ 90% RH (non-condensing) Power Consumption(W) 10.
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.