Specifications

1. INTRODUCTION

The Digital Video Scaler has CV, SV, HD, Component, PC, HDMI and

SDI inputs and can scale the signal into HDMI, VGA with audio output

ports plus a SDI loop out. This high performance digital video scaler

supports HDMI output resolution up to 1080p /WUXGA and Analog

Digital Conversion (ADC) & Digital Analog Conversion (DAC) allowing

a wide range of AV signal to be insert to a high-Definition signal and

displaying. Further, with OSD, remote, RS-232 and on-panel controls

that makes whole for this Digital Video Scaler a friendly using device.

2. APPLICATIONS

• Lecture hall

• Meeting room

• Conference hall

3. PACKAGE CONTENTS

• Digital Video Scaler

• Remote Control (CR-117)

• D-Sub to RCA adaptor cable

• Power Adaptor

• Operation Manual

4. SYSTEM REQUIREMENTS

Input source equipments such as Blu-ray/DVD players or SDI camera,

output display and amplifier or speaker and connection cables.

5. FEATURES

• Supports multi AV inputs to HDMI or PC/HD outputs

• Supports EDID and HDCP

• Supports 3D de-interlace, noise reduction and 3D Comb filter

• Supports frame rate conversion

• Supports SDI loop out

• SDI peration at 2.970Gb/s, 2.970/1.001Gb/s, 1.485Gb/s,

1.485/1.001Gb/s and 270 Mb/s

• Supports SMPTE 425M (Level A and Level B), SMPTE 424M, SMPTE

292M, SMPTE 259M-C

• Supports signal input and output distanes of up to 300m for SD

signals, 200m for HD signals and 100m for 3G signals

Note: 1. SDI cable distance tested with belden 1694A. Operating

distances may be very if used with cables of different specifications.