CSLUX-300 Multi-Format to HDMI Scaler Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������� 1 2. Applications ������������������������������������������� 1 3. Package Contents �������������������������������� 1 4. System Requirements ���������������������������� 1 5. Features �������������������������������������������������� 2 6. Operation Controls and Functions ������� 3 6.1 Front Panel �����������������������������������������3 6.2 Rear Panel �����������������������������������������4 6.
1. INTRODUCTION This Multi-Format to HDMI Scaler is an advanced HDMI, PC, Composite, S-Video and Component switcher/scaler. This device can scale and switch input sources and display them to its HDMI and VGA/HD outputs simultaneously, with their associated audio signals, at a wide range of output resolutions (up to 1080p or WUXGA(RB)). Control is via IR remote, or via front panel buttons and includes an on-screen menu providing settings and system information. 2.
5.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel CSLUX-300 DIGITAL VIDEO SCALER XGA POWER IR INPUT CV SV PC COMP HDMI 1 HDMI 2 MENU - + ENTER 720P 1 2 3 4 5 6 1 POWER and LED Press this button to switch the device ON or to put the device into STANDBY mode. When the device is connected to an active power supply, the LED will illuminate and the device will switch ON automatically. 2 IR Window Receives only the IR signal from the supplied remote control.
6.2 Rear Panel 2 OUTPUT OPTICAL L/R 3 5 RS232 SERVICE R L/R PC/HD HDMI INPUT OPTICAL L CV R L DC 5V PC HDMI 1 HDMI 2 Cr/Pr 1 Cb/Pb Y SV R L 4 1 OUTPUTS HDMI: Connect to an HDMI display or amplifier for video and/or audio output. PC/HD: Connect to a monitor/display for video output. For HD (Component) output, use the supplied D-sub 15-pin to 3 RCA adaptor cable for HD resolutions from 480p~1080p. OPTICAL: Connect to an amplifier or active speakers for audio output in digital format.
4 INPUTS HDMI 1: Connect to an HDMI source such as Blu-ray/DVD player for both video and audio signal conversion. HDMI 2: Connect to an HDMI source such as Blu-ray/DVD player for both video and audio signal conversion. PC: Connect to a PC/Laptop source for video signal input with a D-sub 15-pin cable. YCbCr/YPbPr and L/R: Connect to source equipment such as a DVD player for both video and audio signal conversion.
6.3 Remote Control 1 POWER Press this button to switch the device ON or to put the device into STANDBY mode. 2 3 INPUT POWER CV SV COMP PC HDMI 1 HDMI 2 1 2 INPUT Press to repeatedly select the required input. An LED will illuminate to indicate the currently selected source. 3 CV/SV/COMP/PC/HDMI 1/HDMI 2 Press to directly select the required input. 4 EXIT MENU 5 OK 6 AUTO ADJUST RESET 7 8 4 EXIT Press this button to exit the menu or the current selection in the on-screen menu.
6.
6.
COMMAND DESCRIPTION S HUE 0~60 Setups the numerical equivalent for HUE setting (as left) R HUE Reports the numerical equivalent for HUE setting S SATURATION 0~60 Setups the numerical equivalent for SATURATION setting (as left) R SATURATION Reports the numerical equivalent for SATURATION setting S SHARPNESS 0~30 Setups the numerical equivalent for SHARPNESS setting (as left) R SHARPNESS Reports the numerical equivalent for SHARPNESS setting S NR 0~3 0=OFF 1=LOW R NR Reports the numerical equ
3. Only LPCM 2 channel digital audio is supported, please ensure that the source audio is set to LPCM 2 channel audio in order to avoid unnecessary audio noise. 4. RS-232 commands will be not executed unless followed with a carriage return and LF. Commands are case-insensitive. 6.
MAIN MENU SUBMENU 3RD MENU DISPLAY SIZE OVER SCAN (For VIDEO input) FULL* 4TH MENU BEST FIT PAN SCAN LETTER BOX UNDER 2 UNDER 1 MODE INFO OFF INFO* ON PC AUTO SETUP (For PC input) H_POSITION V_POSITION PHASE CLOCK WXGA/XGA XGA* WXGA RESET 11
MAIN MENU SUBMENU 3RD MENU COLOR COLOR R G B R OFFSET G OFFSET B OFFSET CONTRAST 0~60 BRIGHTNESS 0~60 HUE 0~60 SATURATION 0~60 SHARPNESS 0~30 NR OFF* LOW MIDDLE HIGH AUDIO VOLUME 0~100 DELAY OFF* 40 ms 110 ms 150 ms SOUND ON* MUTE AUDIO SELECT ANALOG* (For AV/SV/YPbPr/ S/PDIF VGA input) 12 4TH MENU
MAIN MENU SUBMENU SETUP FACTORY RESET KEY LOCK 3RD MENU 4TH MENU OFF* ON POWER SAVE OFF* ON INFORMATION INPUT OUTPUT REVISION Note: Items with Asterisk (*) are the Factory default settings.
6.
6.
7.
8. SPECIFICATIONS Input Ports 2×HDMI, 1×VGA, 1×Composite Video, 1×S-Video, 1×Component Video, 3×Analog Stereo (L/R), 1×Optical, 1×3.5mm Mini-jack, 1×RS-232, 1×USB (Service Only), 1×3.5mm Mini-jack (Service Only) Output Ports 1×HDMI, 1×VGA, 1×Optical, 1×3.
9.
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.
