CSO-T2 Instant HQV HD Scaler Box Operation Manual CSO-T2 1
TABLE OF CONTENTS 1. Introduction ......................................................................................... 1 2. Features ............................................................................................... 1 3. Package Contents............................................................................... 1 4. Operation Controls and Functions .................................................... 2 4.1 Front Panel ....................................................................
1. Introduction The Instant HQV HD Scaler box allows the user to maximize the full benefits of the today’s High Definition DTV. Instant HQV uses the Industry leading HQV Realta Video Processor to convert standard definition content (PAL/ NTSC) into crisp, detailed and artifact resolution of your DTV. This allows you to enjoy the full benefits of the high resolution by recreating the cinema like viewing experience as the original DVD content was intended.
. Operation Controls and Functions 4.1 Front Panel 1 2 3 4 1 2 3 4 Power: Press to turn ON/OFF the system. The LED will illuminate in green light when power is ON. When power OFF the LED will illuminate in red light. IR sensor Input selection: Press to select input source (HDMI 1/HDMI 2/Component/ Vdieo/S-Video). The LED will illuminate to indicate which input source is being selected.
. Remote Control 1 Menu: Press the button to bring up OSD main menu page. 2 Power: Press the button once to power on the system, press again to enter standby mode. 3 Cleaner: Press to switch the Noise Reduction (NR) feature. There are four levels can adjust Off/Low/Middle/High and these features workable when input resolution is 480i/480p/1080i. 4 Detail: Press to switch the Detail Enhancement feature. There are five levels can adjust 0/25/50/75/100. The factory default value is 0 (OFF).
. OSD Operation Press [MENU]. Press [▲/▼] to highlight an option. Press [◄/►] to adjust or press [◄] return to previously page. Press [Enter] to confirm the selection 6.1 Input Option Description Input Browse through HDMI1/2, Component, Composite and S-Video 6.
Option Brightness Contrast Color Hue Sharpness Gamma Mode Black-Level Color Temp Description 0~100 of Brightness levels, the factory default value is 50 0~100 of Contrast levels, the factory default value is 50 0~100 of Color levels, the factory default value is 50 0~360 of Hue levels, the factory default value is 180 0~100 of Sharpness levels, the factory default value is 50 Adjust Gamma Correction levels, there are 1.0, 1.8, 2.0, 2.2 and 2.4; the factory default value is 1.0 0 IRE (off), 7.
6.4 HQV Option HQV Processing Description HQV ON/OFF/L 6.
7. Connection and Installation 8.
8
9 20080704MPM-CSOT2
CYPRESS TECHNOLOGY CO., LTD. Home page: http://www.cypress.com.