CSO-T2 Instant HQV HD Scaler Box Operation Manual CSO-T2 1
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. Never spill liquid of any kind on or into this product.
TABLE OF CONTENTS 1. Introduction ......................................................................................... 1 2. Features ............................................................................................... 1 3. Package Contents............................................................................... 1 4. Operation Controls and Functions .................................................... 2 4.1 Front Panel ....................................................................
1. Introduction The Instant HQV HD Scaler box allows you to maximize the full benefits of the today’s HDTV’s. Using the Industry leading HQV Realta Video Processor to convert standard definition content (PAL/NTSC) into a crisp and detailed HD version, this Scaler box is unlike anything you have ever purchased.
4. Operation Controls and Functions 4.1 Front Panel ① ② ③ ④ 1 2 3 4 Power: Press to turn ON/OFF the device. The LED will illuminate when power is ON. IR sensor Input selection: Press the button to select input source (HDMI 1/HDMI 2/ Composit/Vdieo/S-Video). The LED will illuminate to indicate which input source is being selected. Output timing selection: Press this button to select output timing (Auto/1080P/720P). The LED will illuminate to indicate which output timing is being selected. 4.
HDMI output: This slot are where you connect the HDMI output port to the displays with HDMI cable. ⑦ Power: Plug the 5V DC power supply into this unit and connect the adaptor to AC wall outlet. ⑥ 5. Remote Control ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ MENU POWER Menu: Press this button to bring up the OSD main menu page. 2 1 CLEANER DETAIL Power: Press the button once to turn the system on, press a second time to 3 4 enter standby mode. 5 ENTER Cleaner: Press to switch the Noise 6 DEMO A.RATIO Reduction (NR) feature.
6. OSD Operation Press [MENU]. Press [▲/▼] to highlight an option. Press [▲/▼] to adjust or press [◄] to return to the previous page. Press [Enter] to confirm the selection 6.1 Input Option Input Description Browse through HDMI1, HDMI2, Component Video, Composite and S-Video 6.
Option Brightness Contrast Color Hue Sharpness Gamma Mode Black-Level Color Temp Description 0~100 of Brightness levels, the factory default value is at 50 0~100 of Contrast levels, the factory default value is at 50 0~100 of Color levels, the factory default value is at 50 0~360 of Hue levels, the factory default value is at 180 0~100 of Sharpness levels, the factory default value is at 50 Adjust Gamma Correction levels, there are 1.0, 1.8, 2.0, 2.2 and 2.4; the factory default value is at 1.
6.4 PIP Option PIP Enable PIP Inputs PIP Size PIP Position Description PIP feature On or Off Select PIP input sources, the PIP input selection only available when input source is connected Press ←/→ to adjust the PIP size Select to show the PIP position form Top Left, Top Right, Bottom Left or Bottom Right 6.
6.5.1 Keystone Option Projection Application Horizontal Keystone Vertical Keystone Anyplace Location Pincushion/ Barrel Demo Rotation Demo Description Keystone -40~40 horizontal keystone adjustment, factory default value is on 0 -30~30 vertical keystone adjustment, factory default value is on 0 N/A Display location selection: Front Tabletop/Front Ceiling/ Rear Tabletop/Rear Ceiling -15~15 Pincushion/Barrel Demo adjustment, factory default value is on 0 N/A 6.5.
6.5.3 Rotation Option Projection Application Description Anyplace Horizontal Keystone N/A Vertical Keystone N/A Anyplace Location Pincushion/ Barrel Demo Rotation Demo N/A Front Tabletop/Front Ceiling/Rear Tabletop/Rear Ceiling -15~15 Pincushion/Barrel Demo adjustment, factory default value is on 0 -180~180 picture rotation, factory default value is on 0 6.
6.
7.
8.
A Acronyms Acronym Complete Term 12
CYPRESS TECHNOLOGY CO., LTD. Home page: http://www.cypress.com.
