CWHDI-TX2 & RX2 Wireless Multi-Format input Transmitter to HDMI Receiver Box Operation Manual CWHDI-TX2 & RX2
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
Safety Precautions Please read all instructions before attempting to unpack or install or operate this equipment, and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
Table of Contents 1. Introduction ……………………..……………………...…........….……. 1 2. Applications …………………..………………….……...................….. 1 3. Package Contents ………………………...........……….................… 1 4. System Requirements ……………..……….........………............……. 1 5. Features …………………………………………......……........…...…… 2 6. Specifications ………………………………...……..........………....…. 3 7. Operation Controls and Functions ……………...……..............…… 7.1 Transmitter .............................................
1. Introduction The wireless HDMI transmitter and receiver boxes use baseband technology with Wireless High Definition Interface (WHDI) to deliver uncompressed HD audio and video. It can transmit within a distance of 20 meters while maintaining superb, wired equivalent quality and reliability with little to no lag. Both transmitter and receiver boxes come with built in antennas, making them a sleek addition to your Home or Office. These units can also convert analog and digital signals to HDMI V1.
5.
6. Specifications Radio Power Transmit power is configurable up to 63mW (+18dBm) Video Resolutions 480i/p, 576i/p, 720p, 1080i, VGA@60/72Hz, SVGA@56/60/72Hz, XGA@60/70Hz and 1080p@24/30fps Frequencies Supported 4.9 ~ 5.
Dimensions (mm) Transmitter: 226(W) x 165(D) x 46(H) Receiver: 226(W) x 165(D) x 46(H) Weight(g) Transmitter:500 Receiver:440 Chassis Material Plastic Silkscreen Color White Operating Temperature 0˚C ~ 40˚C / 32˚F ~ 104˚F Storage Temperature -20˚C ~ 60˚C / -4˚F ~ 140˚F Relative Humidity 20~90% RH (non-condensing) Power Consumption Transmitter: 13.5W Receiver: 7.
7. Operation Controls and Functions The following sections describe the hardware components of the unit with installation guide and setting methods. 7.1 Transmitter 7.1.
7.1.2 Rear Panel COMPONENT IN AUDIO 2 AUDIO 1 Y2 Y1 Pb/Cb 2 Pb/Cb 1 Pr/Cr 2 Pr/Cr 1 SVIDEO 2 SVIDEO 1 VIDEO 2 VIDEO 1 ① ② AUDIO 2 AUDIO 1 HDMI 1 ③ PC HDMI 2 IN ④ ① Component inputs: These slots are for connecting the component and R/L output ports of your source equipments such as DVD player or set-top-box with component video and R/L cables. Y1, Pb/Cb1,Pr/ Cr1, & Audio1 and Y2, Pb/Cb2, Pr/Cr, & Audio2 are two individual loops for source equipments.
7.2 Receiver 7.2.1 Front Panel LINK POWER ① ② ③ ID POWER ④ ② ① Link LED: When the system is in search mode the LED will flash repeatedly and when the system is in signal linking mode it will slowly flash. When the LED is on and no longer flashing it means a connection has been established and audio/ video can then be sent. ② Power button: Press this button to power up the system, when the LED is lit the system has been turned on.
7.2.2 Rear Panel ① HDMI output: This slot is to connect the HDMI cable to the HDMI input of your display. ② Power: Plug in the 5V DC power supply included in the package and connect the adaptor to an AC outlet. HDMI OUT ① RESERVED POWER ② 5V 2.
8. IR Cable Pin Definitions 8.1 IR Blaster ① Power 5V ② NC ③ IR blaster signal ① ②③ Note: The frequency on both IR Receiver & Blaster can support 36~387KHz with NEC code. 9. Remote Control ① PC: Press this button to select PC input. ② Format selection: Press this button to switch between Interlace and Progressive format. ③ Power: Press this button to turn on/standby the unit. ④ HDMI 1/2: Press no. 1 or 2 buttons to select HDMI 1 or 2 inputs. ⑤ Component 1/2: Press no.
10. Connection and Installation 10.1 Unicast mode PS3 HDMI HDMI HDMI HDMI HDMI Cable DVD LCD TV 20 Meters Blu-ray 10.
10.
11. Troubleshooting Issue Power LED does not light up when power is on. Recommendation 1. Check if the right adaptor is used. Transmitter: 5V/6A and Receiver: 5V/2.6A 2. Check that all power connectors are plugged in correctly. 3. Push the power buttons to turn on the devices. After powering on Tx & Rx boxes the links LED is flashing quickly/slowly without an image being displayed. 1. This is normal when the devices are in search or signal linking mode.
11.1 Input Signal Specifications PC Resolution Vert Rate VGA 640x480 60/72Hz SVGA 800x600 56/60/72Hz XGA 1024x768 60/70Hz HDTV Resolutions Vert Rate 480p 720x480 60Hz 480i 720x480 60Hz 576p 720x576 50Hz 576i 720x576 50Hz 720p 1280x720 50, 60Hz 1080i 1920x1080 50, 60Hz 1080p 1920x1080 24, 30fps 11.
A Acronyms Acronym Complete Term CEC Consumer Electronics Control DNR 3D noise reduction (DNR) HDCP High-bandwidth Digital Content Protection HDMI High-Definition Multimedia Interface MIMO Multiple Input Multiple Output OFDM Orthogonal Frequency Divison Multiplex WHDI Wireless High Definition Interface Unicast Able to connect with one other device. Broadcast Able to connect with more than one device.
CYPRESS TECHNOLOGY CO., LTD. Home page: http://www.cypress.com.
