Specifications

STK17TA8
Document #: 001-52039 Rev. *C Page 11 of 24
Hardware STORE Cycle
Figure 12. Hardware STORE Cycle
Soft Sequence Commands
Figure 13. Soft Sequence Commands
NO.
Symbols
Parameter
STK17TA8
Units Notes
Standard Alternate Min Max
31 t
DELAY
t
HLQZ
Hardware STORE to SRAM Disabled 1 70 μs15
32 t
HLHX
Hardware STORE Pulse Width 15 ns
32
23
31
Notes
15. On a hardware STORE initiation, SRAM operation continues to be enabled for time tDELAY to allow READ/WRITE cycles to compete.
16. This is the amount of time that it takes to take action on a soft sequence command. Vcc power must remain high to effectively register command.
17. Commands like Store and Recall lock out I/O until operation is complete which further increases this time. See specific command.
NO. Symbols Parameter STK17TA8 Units Notes
Standard Min Max
33 t
SS
Soft Sequence Processing Time 70 μs 16,17
33 33
[+] Feedback
Not Recommended for New Designs