Transceiver with Reclocker Specification Sheet

Document #: 38-02097 Rev. *B Revised December 14, 2007 Page 44 of 44
IBM and ESCON are registered trademarks, and FICON is a trademark, of International Business Machines. HOTLink is a registered trademark and HOTLink II and MultiFrame are trademarks of
Cypress Semiconductor. All product and company names mentioned in this document may be the trademarks of their respective holders.
CYV15G0404DXB
© Cypress Semiconductor Corporation, 2005-2007. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of
any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used for
medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use as
critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support systems
application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign),
United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of,
and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress
integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without
the express written permission of Cypress.
Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not
assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where
a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer
assumes all risk of such use and in doing so indemnifies Cypress against all charges.
Use may be limited by and subject to the applicable Cypress software license agreement.
Document History Page
Document Title: CYV15G0404DXB Independent Clock Quad HOTLink II™ Transceiver with Reclocker
Document Number: 38-02097
REV. ECN NO.
ISSUE
DATE
ORIG. OF
CHANGE
DESCRIPTION OF CHANGE
** 231494 See ECN BCD New Data Sheet
*A 384307 See ECN AGT Revised setup and hold times (t
TXDH
, t
TXDS
, t
TREFDH
, t
RXDv+,
t
TXCLKOD,
t
RXDv–
, t
RXDv+
, t
TREFDS
, t
REFxDV–
, t
REFxDV+
, t
RST
, t
RISE
, t
FALL
, t
DJ
)
*B 1845306 See ECN UKK/VED
Added clarification for the necessity of JTAG controller reset and the
methods to implement it.
[+] Feedback [+] Feedback