User manual

80 CY4672 Reference Design Guide, Document # 001-16968 Revision **
Bridge
5.3.2.1 Global Configuration
The following is a description of the Global Resources that are configured for the PRoC LP
CYRF69213. Be very careful when modifying these values as they affect the User Modules dis-
cussed below.
CPU Clock
This parameter is set to Internal (24 MHz). In order to run the CPU at 12 MHz CPU Clock/N needs to
be set to ‘2’. This operating frequency provides for faster code execution.
CPU Clock / N
This parameter is set to ‘2’ to provide a 12 MHz clock.
Timer Clock
This parameter is set to FreeRun Timer.
Timer Clock /N
This parameter is set to ‘4’.
Sleep Timer
This parameter is set to 1_Hz.
FreeRun Timer
This parameter is set to Low Power (32 kHz).
FreeRun Timer /N
This parameter is set to ‘6’.
Capture Edge
This parameter is set to Latest.
8 Bit Capture Prescaler
This parameter is set to ‘1’.
USB Clock
This parameter is set to Internal (24 MHz).
USB Clock /2
This parameter is set to Enable.
CLKOUT Source
This parameter is set to Internal (24 MHz).
Low V Detect
This parameter is set to 4.44 – 4.53 V.
V Reset
This parameter is set to 3.3V.
[+] Feedback