Specifications

CY7C67200
Document #: 38-08014 Rev. *H Page 84 of 85
Document History Page
Document Title: CY7C67200 EZ-OTG™ Programmable USB On-The-Go Host/Peripheral Controller
Document Number: 38-08014
Revision ECN
Orig. of
Change
Submission
Date
Description of Change
** 111872 MUL 03/22/02 New Data Sheet
*A 116988 MUL 08/23/02 Preliminary Data Sheet
*B 124954 MUL 04/10/03 Added Memory Map Section and Ordering Information Section
Moved Functional Register Map Tables into Register section
General Clean-up
Changed from “Preliminary” to “Preliminary Confidential“
*C 126211 MUL 05/23/03 Added Interface Description Section and Power Savings and Reset Section
Added Char Data
General Clean-up
Removed DRAM, MDMA, and EPP
Added “Programmable” to the title page
*D 127334 KKV 05/29/03 Corrected font to enable correct symbol display
*E 129394 MUL 10/07/03 Final Data Sheet
Changed Memory Map Section
Added USB OTG Logo
General Clean-up
*F 472875 ARI See ECN Removed “power consumption” bullet from the Features bullet list.
Corrected number GPIO[31:20] to read GPIO[31:30] in Section “Standalone
Mode”.
Made sentence into a Note in Section “Reset Pin” and repeated the note in
Section “Host Port Interface (HPI)”.
Corrected the Host/Device 1 Interrupt Enable (Bit 8) Information in Section
“Interrupt Enable Register [0xC00E] [R/W]”.
Corrected data on Write Protect Enable (Bit 15) Section “GPIO Control Register
[0xC006] [R/W]” to read “the GPIO Mode Select [15:8] bits are read only until
a chip reset“.
Re-wrote the Register Description in Section “SIEXmsg Register [W]”.
Put document on 2-column template and corrected grammar. Put the figure
captions at the top of the figures per new template specifications.
Added Static Discharge Voltage information in Section “Absolute Maximum
Ratings”
Added compliance statement and TID in Section “USB Transceiver”.
*G 567317 KKVTMP See ECN Added the lead free information on the Ordering Information Section. Imple-
mented the new template with no numbers on the headings.
*H 3378752 NMMA 09/21/11 Updated template and styles according to current Cypress standards.
Updated pin description in Ordering Information table.
Added Acronyms and Units of Measure.
Added Ordering Code Definitions.