CP-255DN DR A FT PC/HD to 1080p DVI Scaler Box Operation Manual
FT DR A
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������� 1 2. Features �������������������������������������������������� 1 3. What's included ������������������������������������� 2 4. Operation Controls and Functions ������� 3 4.1 Front Panel ����������������������������������������3 4.2 Rear Panel �����������������������������������������4 4.3. Remote Control and functions ������5 FT 5. Installation ���������������������������������������������� 6 6.
1. INTRODUCTION Congratulations on your purchase of the Cypress Video Scaler CP255DN. Our professional Video Scaler products have been serving the industry for many years. In addition to Video Scalers, Cypress offers a full line of high quality PC multimedia, Standard Converters, Video Mixer, Time Base Correctors, Video Processors, and HDMI/DVI devices. Please visit www.cypress.com.tw to learn more details about these products. This manual includes operation information on the CP255DN model.
PC analog output will be turned off. • Includes advanced features such as Noise Reduction and overscan/underscan adjustment. 3. WHAT'S INCLUDED The following items are included in the standard package. • PC/HD/DVI to DVI scaler box. • VGA cable x 1 • YPbPr 3RCA cable x 1 DR A FT • AC power adaptor 5V/ 2.6A, center positive.
4. OPERATION CONTROLS AND FUNCTIONS 4.1 Front Panel INPUT Cr/Pr Cb/Pb 1 MENU HD Y/HD 2 PC DVI ENTER 3 AUTO INPUT ADJUST + - 4 POWER 5 6 1 Component Input: Connects this input connector to the FT Component output connector of your source equipment using the enclosed 3RCA to 3RCA cable. The CP-255DN accepts both interlaced component input (480i, 576i) and deinterlaced progressive input (480p, 576p...1080p). The input range is 480i, 570i~1080i, 1080p.
adjust setting value of your selected parameter. 6 Power: Press the button to turn ON or turn OFF (standby) the power of the unit. 4.2 Rear Panel DC 5V 1 DVI OUT 2 PC OUT 3 DVI IN PC IN 4 5 FT 1 Power jack: Connect to the 5V 2.6A DC power adaptor. 2 DVI output: Scaled digital DVI output. Connect this output to the DVI input or HDMI input of your Digital display. Note: When input is a HDCP encrypted DVI signal the DVI output is also HDCP DR A encrypted.
4.3. Remote Control and functions 1 Power: Press the button once to power on the CP-255DN. Press again to enter standby mode. 2 Input: Press the button repeatedly to toggle through various input sources as follows. 3 HD input: Press the button to select component input. input. 6 8 7 10 9 FT 4 PC input: Press the button to select PC 2 3 4 1 5 11 12 5 HDMI/DVI input: Press the button to select DVI (or HDMI) input.
5.
The CP-255DN accepts component, PC and DVI inputs. The formats supported by these inputs are as follows: • When connecting to a PC source use a 15-pin D-sub cable to connect the • output of a PC to the D-Sub input connector of the CP-255DN. • When connecting to a component source (either SD or HD resolution) use a • 3RCA to 3RCA cable to connect the YPbPr or YCbCr output of a DVD or Set Top Box to the Y-Cb/Pb-Cr/Pr input connecter of the CP-255DN.
Output Connection DC 5V DVI Cable DVI OUT or DVI Cable HDMI to DVI connector adaptor PC OUT DVI IN PC IN or DR A HDMI TV LCD TV FT RGBHV HDMI TV LCD or Monitor The CP-255DN can output a variety of PC, SD and HD resolutions in both digital and analog format simultaneously. The digital output is available from the DVI output connector while the analog output is available from the PC D-sub output connector.
6. OSD OPERATION After power on the unit, press the "menu" button will bring up the main menu as follows: Main Menu Video (or PC) Color Output OSD FT Info OSD Info Video(PC) Color Output VGA User Source H.Position Contrast SVGA Normal Input V.
Note (PC): Available only when PC is selected as input. To adjust picture quality, Use "+,-" to move the highlight bar to your desired adjust item, press the Menu/Enter to confirm your selection. At this point, the selected parameter will turn red, you can then use +,to increase or decrease the value of the parameter. When adjustment is complete, press "Menu" to leave the parameter. Move the highlight bar to "Exit", then press Menu/Enter to exit.
6.2 Color User: Select to adjust to your favorite color temperature setting. Normal: Normal color tone setting where white is pue white. Warm: Warm color tone makes white reddish. Cool: Cool color tone makes white bluish. R G B 0 50 100 0 50 100 0 50 100 Value of Normal Setting 6.3 Output 6.4 OSD Adjust FT The CP-255DN can output a wide variety of PC and HD resolutions. Refer to product specifications. H.Position: Adjust the horizontal position of the OSD graphic. V.
7.
Input connectors YCbCr/YPbPr x 1 via 3 RCA jack PC RGB x 1 via 15 pin D-sub DVI x 1 Output connector DVI x 1 PC 15 pin D-sub x 1 180(W)x132(D)x25(H)mm Weigh 452g Power Supply DC 5V 2.
FT DR A
FT DR A CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.
