CP-293N PC/HD to HDMI Scaler Operation Manual
DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate. Cypress Technology assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use. Cypress Technology assumes no responsibility for any inaccuracies that may be contained in this document. Cypress also makes no commitment to update or to keep current the information contained in this document.
SAFETY PRECAUTIONS Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply. Please keep the following in mind as you unpack and install this equipment: • Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. • To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water. • Never spill liquid of any kind on or into this product.
CONTENTS 1. Introduction �������������������������������������������� 1 2. Applications ������������������������������������������� 1 3. Package Contents �������������������������������� 1 4. System Requirements ���������������������������� 1 5. Features �������������������������������������������������� 2 6. Operation Controls and Functions ������� 3 6.1 Front Panel ����������������������������������������3 6.2 Rear Panel �����������������������������������������4 6.
1. INTRODUCTION The PC to HDMI Scaler is designed to upscale an analog video signal from a PC (VGA) or HD (Component Video) source device to digital HDMI output in a wide range of HDTV and PC resolutions up to 1080p/ WUXGA. Additionally this unit can also convert a digital/analog audio signal and then simultaneously output to an HDMI, Optical and 3.5mm Mini-jack (L/R audio) connections.
5.
6. OPERATION CONTROLS AND FUNCTIONS 6.1 Front Panel 1 HDMI OUTPUT: Connect to a HDMI equipped display or AV receiver for video and audio output. 2 OPTICAL OUTPUT: Connect to an amplifier or active speakers with an optical cable for LPCM 2 channel digital audio output. 3 AUDIO OUTPUT: Connect to an amplifier or active speakers with a 3.5mm mini-jack cable for analog audio output. 4 MENU Button: Press this button to enter the OSD (On-Screen Display) menu and press it again to make a selection.
6.2 Rear Panel 1 PC INPUT: Connect to the D-sub/VGA output of a source device such as a PC/Laptop with D-sub 15-pin cable or a DVD player with the supplied D-sub 15-pin to D-sub 15-pin adaptor cable. 2 AUDIO INPUT: Connect to the analog audio output of the source device such as a PC/Laptop with a 3.5mm mini-jack cable. 3 OPTICAL INPUT: Connect to the optical digital audio output of the source device with an optical cable. 4 SERV.
6.
MAIN MENU 1ST LAYER 2ND LAYER OUTPUT SIZE FULL, OVERSCAN, UNDERSCAN, SETTING LETTER BOX, PANSCAN, ASPECT (FULL) RESOLUTION 640×480@60, 800×600@60, 1024×768@60, 1280×1024@60, 1400×150@60, 1600×1200@60, 1280×800@60, 1440×900@60, 1680×1050@60, 1920×1200@60RB, 1600×900@60, 480p, 720p@60, 1080i@60, 1080p@60, 576p, 720p@50, 1080i@50, 1080p@50 EXIT AUDIO DELAY OFF, 40ms, 110ms, 150ms (OFF) SETTING INPUT ANALOG, OPTICAL (ANALOG) SOUND ON, MUTE (ON) EXIT OSD SETTING H-POSITION 0~100 (10) V-POSITI
7.
8. SPECIFICATIONS 8.1 Technical Specifications Video Bandwidth 225 MHz/6.75 Gbps Input Ports 1×D-Sub 15-pin, 1×3.5mm Mini-jack, Optical (TOSLINK), 1×USB (Service only) Output Ports 1×HDMI, Optical (TOSLINK), 1×3.5mm Minijack HDMI Output Resolutions Up to 1080p & WUXGA@60 (RB) HDMI and Optical Audio Up to 48 kHz Sampling Rates Power Supply 5 V/2.
8.
8.3 Audio Specifications INPUT LEVEL/ FREQ. OUTPUT TERMINAL OUTPUT LEVEL THD+N FREQUENCE RESPONSE SNR CROSSTALK Digital 0dB/1kHz Digital 0dB ~ −1dB <0.01% ±3dB >70dB <-80dB Analog 1Vrms/1kHz Digital 0dB ~ −1.5dB <0.1% ±3dB >70dB <−60dB Digital 0dB/1kHz Analog 0.5Vrms ±10% <0.1% ±3dB ±3dB <−60dB Analog 1Vrms/1kHz Analog 0.5Vrms ±10% <0.1% ±3dB >70dB <−60dB 9.
CYPRESS TECHNOLOGY CO., LTD Home page: http://www.cypress.com.