Color Development Tools Selector Guide

Page 9 of 28 5.4-011808

Prototyping Modules (CY3210-2xxxx)

PSoC Prototyping Modules are 28-pin PDIP adapters that

seamlessly connect any PSoC device package-type to the 28-

pin PDIP connector that is default on Cypress PSoC kits. Check

the selection tables in the Kit Components and Accessories

section of this document for a list of Prototyping Modules

offered by Cypress. (Note: Prototyping Modules may sometimes

be referred to as Evaluation PODs.)

Prototyping Modules offer quick and easy prototyping of any

PSoC device and package on a board with just a 600-mil 28-Pin

ZIF socket (included in many of our kits, and easy for a user to

acquire and build on their own.)

Prototyping Modules feature:

• 28-pin DIP footprint (0.6 in width). Fits in a ZIF socket or

breadboard

• ISSP programming header enables programming via ISSP

• Connector for CAT5 cable connection to the ICE-cube

• Port pin-out for 28 pins on bottom of the pod matches port pin-

outs for the 28 pin PDIP PSoC

• Pins for emulating parts with >28 pins are accessible via

receptacles on top of the prototyping module

Prototyping Modules (CY3210-2xxxx) are not to be confused with Emulation PODs (CY3250-2xxxx),

although they also connect to the ICE-Cube (CY3215-DK).

C-USB Bridge (CY3240-I2USB)

The main purpose of the I

C -USB Bridge is to test, tune, and debug programs that have an I

C slave

interface. This application can also be useful for data acquisition and regulation under PC control.

Cypress offers CY3240-I2USB that supports I

C interface and communication to test, debug and tune

device designs in many PSoC kits.

There is a table of I

C -USB Bridge kits located in the Appendix.

USB

CY3240-I2USB

Bridge

PSoC Express

The I

C-USB bridge allows

hardware and software

debug of PSoC Express

applications by bridging the

USB port to I

[+] Feedback