Specifications

"
Unpack Units
Remove cover from Central unit and check interior for any shipping damage. !
Remove any packing material if present.!
!
Before installing the units in the field they should be assembled and tested at a convenient
“Bench top” location. This will make it easier to verify / change settings and check operation
when both units are visible at the same time. !
!
It is also a chance to become familiar with the system if this is the first time using the Suprex
system. It is much more difficult to configure and test the units when they are several hundred
feet apart.!
!
The units as shipped are configured as a matched pair/set and are ready to plug in and
operate.!
!
The Central unit needs to have a suitable power supply installed.
WMR-7211 Base Unit
WMR-7XXX Mobile Unit
Smartcharger for NiMH
Batteries (not included)
Belt Holster!
WMR-HOLB
RPT-5651!
Optional Repeater
Wiegand Expansion !
EXP-1000C
WMR-PRCX!
Programming cards!
(if required)
WMR-BATT-NiMH