Specifications

!
System Description
The Wireless Mobile Reader is the newest member of the Suprex family of products.!
!
The WMR products are based on the Suprex SPX-5600 series of products and they support a
wide range of additional features:!
!
Additional features:!
!
-- AES Encryption for secure communications upon request!
-- No channel selection is required as the units are preconfigured at the factory.!
-- Diagnostic indicator on Central unit for determining operational status of the unit!
-- Repeaters for challenging installations for additional distance and line-of sight!
!
Initial setup and configuration.!
!
The Wireless WMR system operates as a matched pair of units that share the same
communication channel. Each pair is configured at the factory to operate without the need to
set channels.!
!
Each pair communicates using an intelligent addressing algorithm. This allows multiple pairs
of units to operate in the same environment without interfering with each other.!
!
Up to 8 units can operate in the same area without factory modifications !
!
Unit channel selection is made at the factory and no field settings are necessary. !
!
!
Initial Setup:!
!
This manual will cover the basic installation procedure for a typical Suprex WMR system.!
!
The first step will be to configure and test the units at a bench top location where both the
Central and Remote units are close together. This will allow the setup and configuration
process to occur with both sides of the operation in view.!
!
Setup is modified minimally when using EXP-1000 units. Please make note.!
!
See the Address programming Addendum when using multiple Handheld Readers with
EXP-1000 wiegand expansion units