1029-C Itasca St., CHATSWORTH, CALIFORNIA 91311 USA www.cyron.com Under Cabinet Lights CLS1201 / CLS2401 Thank you for purchasing CYRON CLSl201/2401 Under Cabinet Lighting System. Please follow all the steps to assure proper installation and optimum usage of your lighting system. Please locate all system components. If any of the components are missing or damaged contact CYRON before proceeding with installation.
Possibilities Slim profile and the integrated On/Off touch switch makes CYRON Under Cabinet lights usable in many areas. Some of the more common locations are under cabinets, inside display cases, shelving units, step lights and office task lighting.
_____________________ Shelves/Closets ______________________ Keep in mind there are many ways of illuminating objects using this lighting system. Try various locations to achieve the best results. Mounting Lights can easily be mounted in 2 ways . Magnetic mounting needs no drilling. Metal pads are secured in place using high grade two-sided tape. The lights with internal magnets will attach to the metal pads. Alternatively, lights can be mounted with secure brackets and 1/2" screws.
Tape: Place the magnetic pads on the lights. Remove tape liner. Place the lights in the desired location while paying close attention to alignment of the lights. Press for 5 seconds. Do not press too firmly on the plastic lens. Bracket: DO NOT USE SCREWS FOR FASTENING TO FRAGILE SURFACES OR ELECTRICAL DEVICES. Mount the brackets using screws provided. You may also choose other types of hardware that better suit the mounting surface. Make sure the brackets line up properly.
CYRON Technical Support or your qualified electrician for best wiring practices. Here are some common and safe practices that should be kept in mind: Never cut wires or modify the lighting system without consulting CYRON team. Secure all wires using zip ties, wire looms or wire clips. Additional finishing touches can be done with wire management systems such as Wiremold®.
Power Supply: 90-240VAC, 50-60Hz, 18W Operating voltage 24VDC 30,000 hours L70 120 degrees light dispersion 23 5/8" x 11/16" x 5/8" ( CLS2401HS ) 11 3/4" x 11/16" x 5/8" ( CLS1201HS ) 9W (CLS2401HS) 4.5W (CL1202HS) Maximum ratings 18W. Do not exceed total of 4 12" lights or two 24" lights on one power supply.
Cyron warrants this product against any defects in materials or workmanship for a period of TWO (2) years from the date of purchase. The warranty covers normal usage as intended by the factory and does not cover misuse, abuse, accidents, or damages caused due to the acts of God. Proof of purchase is required.
