9439 IRONDALE AVE., CHATSWORTH, CALIFORNIA 91311 USA www.CYRON.com RGB Controller, RF Remote HTW310RF Thank you for purchasing CYRON HTW310RF RF Controller. Please follow all the steps to assure proper installation and optimum usage of this device. Please review all instructions once before you start your project. Contents _____ Please locate all system components. If any of the components are missing or damaged contact CYRON before proceeding with installation.
HTW310RF operates on fully regulated 12VDC power. The size (wattage) of the power supply depends on the number of lights being used. Refer to Table One for calculating the power supply ratings. 12VDC can be supplied via the DC jack on the side or the terminal blocks as shown in the wiring diagram. It is not recommended to use the DC jack if you are supplying more than 6A current or 72W power.
B- , B+: Decrease or increase the brightness in 100 step increments. Press and hold to quickly change thru all 100 steps. S-, S+: Decrease or increase the speed in 100 steps. Press and hold to quickly change thru all 100 steps. Not all buttons will operate in all modes. See chart below for details. Technical Support _____ CYRON’s primary goal is 100% customer satisfaction. You may call our technical support line or contact us via email 24/7. techsupport@cyron.
