User`s manual

Version 1.1
Copyright by
CYTECH 2006
USER’S MANUAL – S/X-SERIES
RESISTANCE ADJUSTMENT
The preferred level of difficulty in pedalling (resistance) can be regulated in fine increments
by use of the resistance knob. To increase the resistance, turn the resistance knob clockwise. To
decrease the resistance, turn the knob counter clockwise.
IMPORTANT: To stop the flywheel (wheel), pull the emergency brake handle upward. The
flywheel should quickly come to a complete stop.
ENG 12 www.indoorcycling.com
HOW TO MOVE THE INDOOR CYCLE
Due to the weight of the indoor cycle, it is recommended that two persons move it.
While one person lifts the back of the indoor cycle, the second person firmly holds the handlebar
and tips the indoor cycle forward until it rolls on the wheels. Carefully move the indoor studio
cycle to the desired location and then lower it. CAUTION: To reduce the risk of injury, use
extreme caution while moving the indoor studio cycle. Do not attempt to move it over
uneven surfaces.
If the indoor cycle rocks
on the floor after being set
down, turn the levelling
feet (see diagram) underneath
the front or rear stabilizer until the rocking
the rocking motion is
eliminated.
WARNING: The indoor cycle does not have a
free moving flywheel (wheel); the pedals will continue to
move together with the flywheel until the flywheel stops.
Reducing speed in a controlled manner is required.
Emergency
Brake Handle
Resistance Knob
Leveling Feet