Product Measurements
Details:
Drawing:
Draw:
Rev:
App.:
12V DC
CW/CCW
Please conduct the welding work in a short time.(Recommendation:With the
soldering iron tip at a temperature of 340400within 2 seconds
Prevent gear motor from being shocked or dropping in mounting
process.It is prohibited to strike and crush directly on reducer output shaft.
Install the screws after
first checking the taps and tap depth against the dimensions entered on the exterior
drawing.
It is necessary to be careful
that the adhesive does not spread along the shaft and flow into the bearing.
Do not
turn a geared motor by its output shaft when,for example,arranging its position so
as to install it.
SG01(180KBC)-3004-000
SPG50-180K
15