ROBOT . HEAD to TOE Product User’s Manual – LoRa Shield Cytron RFM LoRa Shield SHIELD-LORA-RFM User's Manual V1.0 March 2017 Created by Cytron Technologies Sdn. Bhd.
ROBOT . HEAD to TOE Product User’s Manual – LoRa Shield Index 1. Introduction 3 2. Packing List 4 3. Board or Product Layout 5 4. Dimension 7 5. Hardware Installation 8 6. Getting Started 10 7. Warranty 12 Created by Cytron Technologies Sdn. Bhd.
ROBOT . HEAD to TOE Product User’s Manual – LoRa Shield 1.0 INTRODUCTION RFM LoRa Shield is an Arduino shield which integrates RFM95W LoRa module and based on Open Source Library with any Arduino projects. It is compatible with Arduino Uno, Arduino Duemilanove, Arduino Mega2560, Arduino Leonardo and possibly other pin compatible main boards. RFM Lora Shield allows users to send data and reach extremely long ranges at low data-rates.
ROBOT . HEAD to TOE Product User’s Manual – LoRa Shield 2.0 PACKING LIST Please check the parts and components according to the packing lists. If there are any parts missing, please contact us at sales@cytron.com.my immediately. 1. 1 x LoRa Shield 2. 1 x SMA antenna 915MHz 50ohm 3. 1 x pigtail for U.FL antenna Created by Cytron Technologies Sdn. Bhd.
ROBOT . HEAD to TOE Product User’s Manual – LoRa Shield 3.0 BOARD OR PRODUCT LAYOUT 1. Stackable Digital I/O header This header pin is Digital I/O pin stacked to the Arduino main board. Other Arduino shield can be stacked on top of this stackable header. 2. Stackable Analog Input pin header This header pin is Analog Input pin stacked to the Arduino main board. Other Arduino shield can be stacked on top of this stackable header. 3.
ROBOT . HEAD to TOE Product User’s Manual – LoRa Shield 7. SMA 90 deg Antenna Connector Connector for SMA Antenna. By default it comes with Antenna 915MHz 50ohm. 8. Through Hole Antenna Connector A single through hole for wire antenna. User may choose to solder the hole with wire antenna. 9. U.FL SMD Antenna Connector Connector for U.FL SMD Antenna. User may choose to connect it with pigtail and antenna. Created by Cytron Technologies Sdn. Bhd.
ROBOT . HEAD to TOE Product User’s Manual – LoRa Shield 4.0 DIMENSION Created by Cytron Technologies Sdn. Bhd.
ROBOT . HEAD to TOE Product User’s Manual – LoRa Shield 5.0 HARDWARE INSTALLATION This section will show example installation of LoRa-RFM-Shield with Arduino Uno as a main controller. Besides Arduino Uno, other Arduino main boards such as Arduino Duemilanove, CT-UNO, Arduino Mega2560 , CIKU and CT-ARM are also compatible with this shield. 5.
ROBOT . HEAD to TOE Product User’s Manual – LoRa Shield 6.0 GETTING STARTED Please refer to our wiki page. Created by Cytron Technologies Sdn. Bhd.
ROBOT . HEAD to TOE Product User’s Manual – LoRa Shield 7.0 WARRANTY Product warranty is valid for 6 months. ● Warranty only applies to manufacturing defect. ● Damage caused by misuse is not covered under warranty ● Warranty does not cover freight cost for both ways. ● Prepared by Cytron Technologies Sdn. Bhd. No. 16, Jalan Industri Ringan Permatang Tinggi 2, Kawasan Industri Ringan Permatang Tinggi, 14100 Simpang Ampat, Penang, Malaysia. Tel: Fax: +604 - 504 1878 +604 - 504 0138 URL: www.cytron.com.