Product User’s Manual – RB-Cyt-153 (MDD10A) MDD10A Dual Channel 10A DC Motor Driver User's Manual V2.0 June 2017 Created by Cytron Technologies Sdn. Bhd.
Product User’s Manual – RB-Cyt-153 (MDD10A) INDEX 1. Introduction/Overview 3 2. Packing List 4 3. Product Specification and Limitation 5 4. Dimension 6 5. Board Layout 7 6. Getting Started 10 7. Warranty 11 Created by Cytron Technologies Sdn. Bhd.
Product User’s Manual – RB-Cyt-153 (MDD10A) 1. INTRODUCTION/OVERVIEW MDD10A is the dual channel version of MD10C which is designed to drive 2 brushed DC motors with high current up to 10A continuously. Just like MD10C, the MDD10A also supports locked-antiphase and sign-magnitude PWM signal.
Product User’s Manual – RB-Cyt-153 (MDD10A) 2. PACKING LIST Please check the parts and components according to the packing list. If there are any parts missing, please contact us at sales@cytron.com.my immediately. 1. 2. 3. 4.
Product User’s Manual – RB-Cyt-153 (MDD10A) 3. PRODUCT SPECIFICATION AND LIMITATIONS Absolute Maximum Rating No. Parameters Min Typical Max Unit 5 - 30 V - - 10 A 1 Power Input Voltage*** 2 IMAX (Maximum Current)* 3 IPEAK – (Peak Motor Current) ** - - 30 A 4 VIOH (Logic Input – High Level) 3 - 5.
Product User’s Manual – RB-Cyt-153 (MDD10A) 5. BOARD LAYOUT Created by Cytron Technologies Sdn. Bhd.
Product User’s Manual – RB-Cyt-153 (MDD10A) 1. Red LED M1A – Turns on when the output M1A is high and output M1B is low. Indicates the current flows from output M1A to M1B. 2. Red LED M1B – Turns on when the output M1A is low and output M1B is high.
Product User’s Manual – RB-Cyt-153 (MDD10A) 6. Input Pin No.
Product User’s Manual – RB-Cyt-153 (MDD10A) Note: Please use battery when driving inductive load such as DC brush motor. Due to the protection circuit of most Power supply (switching), it will shut down when regenerative current from motor is detected.
Product User’s Manual – RB-Cyt-153 (MDD10A) 6. GETTING STARTED 6.1 Getting Started MDD10A with SK40C MDD10A is compatible with 2 types of PWM operation, which are: 1. Sign-Magnitude PWM – For sign-magnitude PWM operation, 2 control signals are used to control the speed and direction of the motor.
Product User’s Manual – RB-Cyt-153 (MDD10A) 7. WARRANTY ● ● ● ● Product warranty is valid for 12 months. Warranty only applies to manufacturing defect. Damage caused by misuse is not covered under warranty. Warranty does not cover freight cost for both ways. Prepared by: Cytron Technologies Sdn.