User Instructions

- 4 -
 power adjustment
The output power of the machine in two stages: High-power file (H): >7W; Low power file (L): <1W
Turn off the power adapter, disconnect the transmitter power finish line state to follow these steps:
1. First press and hold the power switch 【 】 ,and connect the power (DC 12V) to
the antenna, after 3 seconds after release the key, at this time into the power adjustment
status, the LCD display shows "L" or "H" (default image file H high power)
2. Press【▲】 , and set it as high power (H)
3. Press【▼】, and set it as low power (L)
4. Select the desired power profile, and press【 】 .power setting finished, and it will into
frequency range setting state.
 Frequency range setting
(1) After the power setting, it will enter the frequency range setting state, power setting is
completed, press the LCD screen display shows a set of frequencies, the frequency data
is the high-end of the operating band (below)